This CAIIB ABFM MCQ set is for bankers preparing for the IIBF CAIIB Advanced Business & Financial Management paper. Attempt all 10 questions below—tap an option to see whether you are right, then read the short explanation. These are SimplifyingFin practice questions, not official IIBF questions.
Part of the CAIIB ABFM MCQ practice series. Previous: Day 3
CAIIB ABFM MCQ Day 4 quiz: 10 questions
Show answer
Answer: C — Esteem needs.
The idea: Once lower needs are reasonably met, the next unmet need becomes the motivator. Wanting recognition, status and respect from others is the esteem level.
- Pay comfortable → basic (physiological) needs are met.
- Job secure → safety needs are met.
- Good relations with the team → social (belonging) needs are met.
- Public award and being consulted by seniors = recognition, status and respect, which Maslow calls esteem needs.
- The only level above esteem is self-actualisation (reaching one’s full potential), which the case does not describe.
Why the others are wrong:
- A (Physiological needs): Physiological needs are food, shelter and basic income; the case says his pay is already comfortable.
- B (Safety (security) needs): Safety needs are job security and protection from risk; the case says his job is secure.
- D (Social (belonging) needs): Social needs are acceptance and friendship; he already gets on well with his team.
- E (Hygiene factors): Hygiene factors belong to Herzberg’s two-factor theory, not to Maslow’s hierarchy, and they cover pay and working conditions rather than recognition.
Memory tip: Maslow ladder: Physiological → Safety → Social → Esteem → Self-actualisation.
Answer: C — Esteem needs.
The idea: Once lower needs are reasonably met, the next unmet need becomes the motivator. Wanting recognition, status and respect from others is the esteem level.
- Pay comfortable → basic (physiological) needs are met.
- Job secure → safety needs are met.
- Good relations with the team → social (belonging) needs are met.
- Public award and being consulted by seniors = recognition, status and respect, which Maslow calls esteem needs.
- The only level above esteem is self-actualisation (reaching one’s full potential), which the case does not describe.
Why the others are wrong:
- A (Physiological needs): Physiological needs are food, shelter and basic income; the case says his pay is already comfortable.
- B (Safety (security) needs): Safety needs are job security and protection from risk; the case says his job is secure.
- D (Social (belonging) needs): Social needs are acceptance and friendship; he already gets on well with his team.
- E (Hygiene factors): Hygiene factors belong to Herzberg’s two-factor theory, not to Maslow’s hierarchy, and they cover pay and working conditions rather than recognition.
Memory tip: Maslow ladder: Physiological → Safety → Social → Esteem → Self-actualisation.
Show answer
Answer: E — Large fintech lenders entering its main microfinance districts — Threat.
The idea: SWOT splits factors by source: strengths and weaknesses are inside the bank and under its control; opportunities and threats come from the outside environment.
- Ask first: is the factor inside the bank or outside it?
- Inside and helpful → Strength; inside and harmful → Weakness.
- Outside and helpful → Opportunity; outside and harmful → Threat.
- New fintech competitors entering its districts are outside the bank and harmful, so they are a Threat.
Why the others are wrong:
- A (Its own outdated core-banking software — Threat): The bank’s own software is an internal factor, so a poor system is a Weakness, not a Threat.
- B (A government push for digital payments in its rural markets — Weakness): A government digital push is an external, helpful development, so it is an Opportunity, not a Weakness.
- C (A loyal, low-cost deposit base built over years — Opportunity): A loyal low-cost deposit base is an internal asset the bank already has, so it is a Strength, not an Opportunity.
- D (High attrition among its own trained field staff — Strength): High staff attrition is an internal problem, so it is a Weakness, not a Strength.
Check:
| Helpful | Harmful | |
|---|---|---|
| Internal | Strength | Weakness |
| External | Opportunity | Threat |
Memory tip: S and W live inside; O and T come from outside.
Answer: E — Large fintech lenders entering its main microfinance districts — Threat.
The idea: SWOT splits factors by source: strengths and weaknesses are inside the bank and under its control; opportunities and threats come from the outside environment.
- Ask first: is the factor inside the bank or outside it?
- Inside and helpful → Strength; inside and harmful → Weakness.
- Outside and helpful → Opportunity; outside and harmful → Threat.
- New fintech competitors entering its districts are outside the bank and harmful, so they are a Threat.
Why the others are wrong:
- A (Its own outdated core-banking software — Threat): The bank’s own software is an internal factor, so a poor system is a Weakness, not a Threat.
- B (A government push for digital payments in its rural markets — Weakness): A government digital push is an external, helpful development, so it is an Opportunity, not a Weakness.
- C (A loyal, low-cost deposit base built over years — Opportunity): A loyal low-cost deposit base is an internal asset the bank already has, so it is a Strength, not an Opportunity.
- D (High attrition among its own trained field staff — Strength): High staff attrition is an internal problem, so it is a Weakness, not a Strength.
Check:
| Helpful | Harmful | |
|---|---|---|
| Internal | Strength | Weakness |
| External | Opportunity | Threat |
Memory tip: S and W live inside; O and T come from outside.
Show answer
Answer: A — 8 weeks.
The idea: PERT does not just take the most likely figure. It gives the most likely estimate four times the weight of each extreme, so one long pessimistic estimate pulls the plan up a little, here by one week.
- PERT expected time: tₑ = (a + 4m + b) ÷ 6, where a = optimistic, m = most likely, b = pessimistic.
- Substitute: tₑ = (4 + 4 × 7 + 16) ÷ 6.
- 4 × 7 = 28, so the numerator is 4 + 28 + 16 = 48.
- tₑ = 48 ÷ 6 = 8 weeks.
Why the others are wrong:
- B (9 weeks): 9 weeks is the simple average (4 + 7 + 16) ÷ 3; PERT weights the most likely estimate four times.
- C (7 weeks): 7 weeks is only the most likely estimate; PERT combines all three estimates.
- D (10 weeks): 10 weeks is the midpoint of the extremes, (4 + 16) ÷ 2, which ignores the most likely estimate.
- E (2 weeks): 2 weeks is the activity’s standard deviation, (16 − 4) ÷ 6, not its expected time.
Check: 8 weeks lies between the most likely (7) and the simple average (9), as expected when the pessimistic tail is long.
Memory tip: Weights 1–4–1, divide by 6.
Answer: A — 8 weeks.
The idea: PERT does not just take the most likely figure. It gives the most likely estimate four times the weight of each extreme, so one long pessimistic estimate pulls the plan up a little, here by one week.
- PERT expected time: tₑ = (a + 4m + b) ÷ 6, where a = optimistic, m = most likely, b = pessimistic.
- Substitute: tₑ = (4 + 4 × 7 + 16) ÷ 6.
- 4 × 7 = 28, so the numerator is 4 + 28 + 16 = 48.
- tₑ = 48 ÷ 6 = 8 weeks.
Why the others are wrong:
- B (9 weeks): 9 weeks is the simple average (4 + 7 + 16) ÷ 3; PERT weights the most likely estimate four times.
- C (7 weeks): 7 weeks is only the most likely estimate; PERT combines all three estimates.
- D (10 weeks): 10 weeks is the midpoint of the extremes, (4 + 16) ÷ 2, which ignores the most likely estimate.
- E (2 weeks): 2 weeks is the activity’s standard deviation, (16 − 4) ÷ 6, not its expected time.
Check: 8 weeks lies between the most likely (7) and the simple average (9), as expected when the pessimistic tail is long.
Memory tip: Weights 1–4–1, divide by 6.
Show answer
Answer: D — 1.50.
The idea: A DFL of 1.5 means that if EBIT rises or falls by 10%, earnings for shareholders move by about 15%. Fixed interest magnifies the swing.
- Degree of financial leverage: DFL = EBIT ÷ EBT, where EBT = EBIT − interest (no preference dividend here).
- EBT = 120 − 40 = ₹80 lakh.
- DFL = 120 ÷ 80 = 1.50.
Why the others are wrong:
- A (3.00): 3.00 is EBIT ÷ interest (120 ÷ 40), the interest coverage ratio, not DFL.
- B (0.67): 0.67 is EBT ÷ EBIT (80 ÷ 120), the formula turned upside down.
- C (1.33): 1.33 is 1 + interest ÷ EBIT (1 + 40 ÷ 120); the correct form is EBIT ÷ (EBIT − interest).
- E (0.75): 0.75 is EBIT ÷ (EBIT + interest) = 120 ÷ 160; interest should be subtracted, not added.
Check:
| Base | EBIT +10% | |
|---|---|---|
| EBIT | 120 | 132 |
| Interest | 40 | 40 |
| EBT | 80 | 92 |
| Change in EBT | +15% |
A 10% rise in EBIT gives a 15% rise in EBT, which confirms DFL = 1.5.
Memory tip: DFL = EBIT ÷ EBT. It is always above 1 when there is fixed interest.
Answer: D — 1.50.
The idea: A DFL of 1.5 means that if EBIT rises or falls by 10%, earnings for shareholders move by about 15%. Fixed interest magnifies the swing.
- Degree of financial leverage: DFL = EBIT ÷ EBT, where EBT = EBIT − interest (no preference dividend here).
- EBT = 120 − 40 = ₹80 lakh.
- DFL = 120 ÷ 80 = 1.50.
Why the others are wrong:
- A (3.00): 3.00 is EBIT ÷ interest (120 ÷ 40), the interest coverage ratio, not DFL.
- B (0.67): 0.67 is EBT ÷ EBIT (80 ÷ 120), the formula turned upside down.
- C (1.33): 1.33 is 1 + interest ÷ EBIT (1 + 40 ÷ 120); the correct form is EBIT ÷ (EBIT − interest).
- E (0.75): 0.75 is EBIT ÷ (EBIT + interest) = 120 ÷ 160; interest should be subtracted, not added.
Check:
| Base | EBIT +10% | |
|---|---|---|
| EBIT | 120 | 132 |
| Interest | 40 | 40 |
| EBT | 80 | 92 |
| Change in EBT | +15% |
A 10% rise in EBIT gives a 15% rise in EBT, which confirms DFL = 1.5.
Memory tip: DFL = EBIT ÷ EBT. It is always above 1 when there is fixed interest.
Show answer
Answer: B — 600 units.
The idea: EOQ is the order size at which the yearly cost of placing orders equals the yearly cost of holding stock. For a banker it shows how much raw-material stock the borrower reasonably needs to carry.
- Carrying cost per unit per year: C = 20% × ₹100 = ₹20.
- EOQ = √(2 × A × O ÷ C), where A = annual usage and O = cost per order.
- 2 × 7,200 × 500 = 72,00,000.
- 72,00,000 ÷ 20 = 3,60,000.
- √3,60,000 = 600 units.
Why the others are wrong:
- A (268 units): 268 units uses the unit price ₹100 as the carrying cost (√(72,00,000 ÷ 100)); carrying cost is 20% of the price, ₹20.
- C (424 units): 424 units leaves out the 2 in the formula (√(7,200 × 500 ÷ 20)).
- D (12 units): 12 is the number of orders a year at the EOQ (7,200 ÷ 600), not the order size.
- E (6,000 units): 6,000 units divides by 0.20 instead of by ₹20 (√(72,00,000 ÷ 0.20)), using the rate in place of the rupee carrying cost.
Check:
| At 600 units | Working | ₹ a year |
|---|---|---|
| Ordering cost | 12 orders × ₹500 | 6,000 |
| Carrying cost | (600 ÷ 2) × ₹20 | 6,000 |
The two costs are equal at the EOQ.
Memory tip: Convert the carrying rate to rupees per unit first, then apply √(2AO ÷ C).
Answer: B — 600 units.
The idea: EOQ is the order size at which the yearly cost of placing orders equals the yearly cost of holding stock. For a banker it shows how much raw-material stock the borrower reasonably needs to carry.
- Carrying cost per unit per year: C = 20% × ₹100 = ₹20.
- EOQ = √(2 × A × O ÷ C), where A = annual usage and O = cost per order.
- 2 × 7,200 × 500 = 72,00,000.
- 72,00,000 ÷ 20 = 3,60,000.
- √3,60,000 = 600 units.
Why the others are wrong:
- A (268 units): 268 units uses the unit price ₹100 as the carrying cost (√(72,00,000 ÷ 100)); carrying cost is 20% of the price, ₹20.
- C (424 units): 424 units leaves out the 2 in the formula (√(7,200 × 500 ÷ 20)).
- D (12 units): 12 is the number of orders a year at the EOQ (7,200 ÷ 600), not the order size.
- E (6,000 units): 6,000 units divides by 0.20 instead of by ₹20 (√(72,00,000 ÷ 0.20)), using the rate in place of the rupee carrying cost.
Check:
| At 600 units | Working | ₹ a year |
|---|---|---|
| Ordering cost | 12 orders × ₹500 | 6,000 |
| Carrying cost | (600 ÷ 2) × ₹20 | 6,000 |
The two costs are equal at the EOQ.
Memory tip: Convert the carrying rate to rupees per unit first, then apply √(2AO ÷ C).
Show answer
Answer: A — Retain all earnings (zero payout).
The idea: Walter compares what the firm can earn on retained money (r) with what shareholders could earn elsewhere (k). If the firm earns more, every rupee kept in the business is worth more than a rupee paid out.
- Identify r = 18% (return on retained earnings) and k = 12% (cost of equity).
- Walter’s rule: r > k (growth firm) → share price is highest at zero payout.
- r < k (declining firm) → share price is highest at 100% payout.
- r = k (normal firm) → payout does not change the price.
- Here 18% > 12%, so retaining all earnings maximises the share price.
Why the others are wrong:
- B (Pay out all earnings as dividend (100% payout)): 100% payout is optimal under Walter only when r < k; here the firm earns more than shareholders require.
- C (Any payout, because dividend policy is irrelevant at every level of return): Under Walter, dividend policy is irrelevant only when r = k; it matters here because r ≠ k.
- D (A fixed 50% payout regardless of returns): Walter’s model gives a corner solution (0% or 100%) when r ≠ k, not a fixed middle payout.
- E (Pay dividends only by borrowing, to keep retained earnings intact): Borrowing to pay dividends is outside the model, which assumes all financing comes from retained earnings.
Memory tip: Walter: r > k keep it all; r < k pay it all; r = k no difference.
Answer: A — Retain all earnings (zero payout).
The idea: Walter compares what the firm can earn on retained money (r) with what shareholders could earn elsewhere (k). If the firm earns more, every rupee kept in the business is worth more than a rupee paid out.
- Identify r = 18% (return on retained earnings) and k = 12% (cost of equity).
- Walter’s rule: r > k (growth firm) → share price is highest at zero payout.
- r < k (declining firm) → share price is highest at 100% payout.
- r = k (normal firm) → payout does not change the price.
- Here 18% > 12%, so retaining all earnings maximises the share price.
Why the others are wrong:
- B (Pay out all earnings as dividend (100% payout)): 100% payout is optimal under Walter only when r < k; here the firm earns more than shareholders require.
- C (Any payout, because dividend policy is irrelevant at every level of return): Under Walter, dividend policy is irrelevant only when r = k; it matters here because r ≠ k.
- D (A fixed 50% payout regardless of returns): Walter’s model gives a corner solution (0% or 100%) when r ≠ k, not a fixed middle payout.
- E (Pay dividends only by borrowing, to keep retained earnings intact): Borrowing to pay dividends is outside the model, which assumes all financing comes from retained earnings.
Memory tip: Walter: r > k keep it all; r < k pay it all; r = k no difference.
Show answer
Answer: C — The weighted average cost of capital (WACC), giving enterprise value.
The idea: Match the cash flow to the people it belongs to. FCFF belongs to all capital providers, so it is discounted at their blended required return, the WACC.
- FCFF is cash available to both debt and equity holders.
- The discount rate must reflect the required return of all those providers together, which is WACC.
- Discounting FCFF at WACC gives the value of the firm (enterprise value).
- Equity value = firm value − value of debt (net of cash).
- By contrast, free cash flow to equity (FCFE) is discounted at the cost of equity to give equity value directly.
Why the others are wrong:
- A (The cost of equity, to give the value of equity directly): The cost of equity is the right rate for FCFE (cash left for shareholders after debt payments), not for FCFF.
- B (The pre-tax cost of debt): The cost of debt reflects only lenders’ required return, while FCFF also belongs to shareholders.
- D (The risk-free rate, because cash flows are already after tax): Tax has nothing to do with risk; using the risk-free rate would ignore business risk and overstate value.
- E (The dividend yield of the share): Dividend yield is a market ratio, not a required rate of return for discounting cash flows.
Memory tip: FCFF ↔ WACC ↔ firm value; FCFE ↔ cost of equity ↔ equity value.
Answer: C — The weighted average cost of capital (WACC), giving enterprise value.
The idea: Match the cash flow to the people it belongs to. FCFF belongs to all capital providers, so it is discounted at their blended required return, the WACC.
- FCFF is cash available to both debt and equity holders.
- The discount rate must reflect the required return of all those providers together, which is WACC.
- Discounting FCFF at WACC gives the value of the firm (enterprise value).
- Equity value = firm value − value of debt (net of cash).
- By contrast, free cash flow to equity (FCFE) is discounted at the cost of equity to give equity value directly.
Why the others are wrong:
- A (The cost of equity, to give the value of equity directly): The cost of equity is the right rate for FCFE (cash left for shareholders after debt payments), not for FCFF.
- B (The pre-tax cost of debt): The cost of debt reflects only lenders’ required return, while FCFF also belongs to shareholders.
- D (The risk-free rate, because cash flows are already after tax): Tax has nothing to do with risk; using the risk-free rate would ignore business risk and overstate value.
- E (The dividend yield of the share): Dividend yield is a market ratio, not a required rate of return for discounting cash flows.
Memory tip: FCFF ↔ WACC ↔ firm value; FCFE ↔ cost of equity ↔ equity value.
Show answer
Answer: E — A leveraged buyout.
The idea: In a leveraged buyout the buyer uses little of its own money; the target company’s assets and cash flows carry most of the acquisition debt.
- Price is paid mainly with borrowed money (about 75% debt).
- The debt is secured on the target’s assets.
- Repayment comes from the target’s future cash flows.
- High debt + target’s assets as security + target’s cash flows for repayment = leveraged buyout (LBO).
Why the others are wrong:
- A (A demerger): A demerger splits off an undertaking of a company into another company; nothing is bought with borrowed money here.
- B (A reverse merger): A reverse merger is when an unlisted company merges into a listed one (often a smaller shell) to get a listing; the case is a debt-funded purchase.
- C (A share-swap amalgamation): A share-swap amalgamation pays the target’s shareholders in the acquirer’s shares, not mainly with borrowed cash.
- D (A rights issue): A rights issue raises new capital from a company’s existing shareholders; it is not an acquisition.
Memory tip: LBO = buy with borrowed money; let the target repay it.
Answer: E — A leveraged buyout.
The idea: In a leveraged buyout the buyer uses little of its own money; the target company’s assets and cash flows carry most of the acquisition debt.
- Price is paid mainly with borrowed money (about 75% debt).
- The debt is secured on the target’s assets.
- Repayment comes from the target’s future cash flows.
- High debt + target’s assets as security + target’s cash flows for repayment = leveraged buyout (LBO).
Why the others are wrong:
- A (A demerger): A demerger splits off an undertaking of a company into another company; nothing is bought with borrowed money here.
- B (A reverse merger): A reverse merger is when an unlisted company merges into a listed one (often a smaller shell) to get a listing; the case is a debt-funded purchase.
- C (A share-swap amalgamation): A share-swap amalgamation pays the target’s shareholders in the acquirer’s shares, not mainly with borrowed cash.
- D (A rights issue): A rights issue raises new capital from a company’s existing shareholders; it is not an acquisition.
Memory tip: LBO = buy with borrowed money; let the target repay it.
Show answer
Answer: B — A demerger.
The idea: A demerger splits one business out of a company into a separate ‘resulting company’. The same shareholders end up owning both companies, so value is unlocked without a cash sale.
- One company (the demerged company) transfers an undertaking to another (the resulting company).
- All assets and liabilities of that undertaking move together.
- The resulting company issues shares to the demerged company’s shareholders in proportion to their holdings.
- These features describe a demerger.
Why the others are wrong:
- A (A slump sale for cash): In a slump sale an undertaking is sold for a lump-sum cash price; here the consideration is shares issued to shareholders.
- C (A buyback of shares): A buyback is a company purchasing its own shares; no undertaking is transferred in a buyback.
- D (A horizontal merger): A horizontal merger combines two companies in the same line of business; here one company is being split, not combined.
- E (A leveraged buyout): A leveraged buyout is a debt-funded purchase of a company; no outside buyer or borrowing is involved here.
Memory tip: Demerger = one company becomes two; same shareholders, proportionate shares.
Answer: B — A demerger.
The idea: A demerger splits one business out of a company into a separate ‘resulting company’. The same shareholders end up owning both companies, so value is unlocked without a cash sale.
- One company (the demerged company) transfers an undertaking to another (the resulting company).
- All assets and liabilities of that undertaking move together.
- The resulting company issues shares to the demerged company’s shareholders in proportion to their holdings.
- These features describe a demerger.
Why the others are wrong:
- A (A slump sale for cash): In a slump sale an undertaking is sold for a lump-sum cash price; here the consideration is shares issued to shareholders.
- C (A buyback of shares): A buyback is a company purchasing its own shares; no undertaking is transferred in a buyback.
- D (A horizontal merger): A horizontal merger combines two companies in the same line of business; here one company is being split, not combined.
- E (A leveraged buyout): A leveraged buyout is a debt-funded purchase of a company; no outside buyer or borrowing is involved here.
Memory tip: Demerger = one company becomes two; same shareholders, proportionate shares.
Show answer
Answer: D — Prescriptive analytics.
The idea: Analytics moves up a ladder: what happened, why it happened, what will happen and what we should do. A tool that recommends the best action is at the top of that ladder.
- Descriptive: summarises what happened (for example last month’s overdue amounts).
- Diagnostic: explains why it happened (for example why delinquency rose in one district).
- Predictive: estimates what is likely to happen (for example the chance a borrower pays this month).
- Prescriptive: recommends what to do to get the best outcome.
- The model chooses the best action and timing for each borrower, so it is prescriptive analytics.
Why the others are wrong:
- A (Descriptive analytics): Descriptive analytics only reports past results; it does not recommend actions.
- B (Diagnostic analytics): Diagnostic analytics looks for the causes of past results; it does not choose the next action.
- C (Web analytics): Web analytics measures website traffic and user behaviour; the case is about collections decisions.
- E (Data warehousing): A data warehouse stores and organises data; it is infrastructure, not a type of analytics that recommends actions.
Memory tip: What happened → Why → What will happen → What should we do (prescriptive).
Answer: D — Prescriptive analytics.
The idea: Analytics moves up a ladder: what happened, why it happened, what will happen and what we should do. A tool that recommends the best action is at the top of that ladder.
- Descriptive: summarises what happened (for example last month’s overdue amounts).
- Diagnostic: explains why it happened (for example why delinquency rose in one district).
- Predictive: estimates what is likely to happen (for example the chance a borrower pays this month).
- Prescriptive: recommends what to do to get the best outcome.
- The model chooses the best action and timing for each borrower, so it is prescriptive analytics.
Why the others are wrong:
- A (Descriptive analytics): Descriptive analytics only reports past results; it does not recommend actions.
- B (Diagnostic analytics): Diagnostic analytics looks for the causes of past results; it does not choose the next action.
- C (Web analytics): Web analytics measures website traffic and user behaviour; the case is about collections decisions.
- E (Data warehousing): A data warehouse stores and organises data; it is infrastructure, not a type of analytics that recommends actions.
Memory tip: What happened → Why → What will happen → What should we do (prescriptive).
Topics covered today
- Module A — The Management Process: Directing — Motivation (Maslow); Strategic management — SWOT analysis; Controlling — PERT time estimates
- Module B — Advanced Concepts of Financial Management: Leverage — Degree of financial leverage; Working capital — Economic order quantity; Dividend policy — Walter model
- Module C — Valuation, Mergers & Acquisitions: DCF valuation — FCFF vs FCFE; Acquisitions — Leveraged buyout; Restructuring — Demerger
- Module D — Emerging Business Solutions: Business analytics — Types of analytics
Tomorrow’s post continues the series with another fresh set of 10 CAIIB Advanced Business & Financial Management practice questions. Bookmark SimplifyingFin and revise one set a day.
Disclaimer: This quiz is an independent practice aid for educational purposes. It is not affiliated with, endorsed by, or published by IIBF. Always cross-check regulations and circulars from official RBI/IIBF sources before relying on any figure in an exam or at work.

