CAIIB BRBL MCQ practice series: daily practice quiz with instant answers.

CAIIB ABM MCQ Practice Day 6: 10 Questions with Answers

This CAIIB ABM MCQ set is for bankers preparing for the IIBF CAIIB Advanced Bank Management paper. Attempt all 10 questions below—tap an option to see whether you are right, then read the short explanation. These are SimplifyingFin practice questions, not official IIBF questions.

Part of the CAIIB ABM MCQ practice series. Previous: Day 5

CAIIB ABM MCQ Day 6 quiz: 10 questions

Score: 0 / 10 answered 0
1
A customer invests ₹12,000 in a mutual fund scheme on the first of each month for three months. The NAVs on the three dates are ₹20, ₹30 and ₹60. What is his average cost per unit over the three purchases?
Show answer

Answer: C — ₹30.00.

The idea: ₹30 is what each unit really cost him: ₹36,000 paid for 1,200 units. It is lower than the simple average NAV because a fixed rupee amount buys more units when the NAV is low. This is the rupee-cost averaging point a branch officer explains to SIP customers.

  1. When the same rupee amount is spent at each price, the average cost per unit is the harmonic mean of the prices: n ÷ (1/x₁ + 1/x₂ + … + 1/xₙ).
  2. 1/20 + 1/30 + 1/60 = 3/60 + 2/60 + 1/60 = 6/60 = 0.10.
  3. Harmonic mean = 3 ÷ 0.10 = ₹30.
  4. Check by units: 12,000 ÷ 20 = 600; 12,000 ÷ 30 = 400; 12,000 ÷ 60 = 200; total 1,200 units for ₹36,000, so 36,000 ÷ 1,200 = ₹30.
  5. Shortcut: equal rupees at each price → harmonic mean; equal units at each price → arithmetic mean.

Why the others are wrong:

  • A (₹36.67): ₹36.67 is the arithmetic mean of the NAVs, (20 + 30 + 60) ÷ 3. That would be his cost only if he bought the same number of units each month.
  • B (₹33.02): ₹33.02 is the geometric mean, the cube root of 20 × 30 × 60. The geometric mean suits growth rates, not the cost of equal-rupee purchases.
  • D (₹40.00): ₹40.00 is the mid-range, (20 + 60) ÷ 2, the average of the lowest and highest NAV only.
  • E (1,200 units): 1,200 is the total number of units bought. It is a quantity, not an average cost per unit.

Check:

Month NAV (₹) Units for ₹12,000
1 20 600
2 30 400
3 60 200
Total — 1,200 units for ₹36,000

36,000 ÷ 1,200 = ₹30. Note HM (30) < GM (33.02) < AM (36.67), as always for unequal positive values.

Memory tip: Fixed amount, changing price → harmonic mean. That is why SIP average cost sits below the average NAV.

2
A branch forecasts the number of new savings accounts it will open each month by exponential smoothing with a smoothing constant of 0.3. For October it had forecast 480 accounts, but it actually opened 520. What is its forecast for November?
Show answer

Answer: A — 492.

The idea: The October forecast was 40 accounts too low. With a smoothing constant of 0.3, the branch moves its forecast up by only 30% of that miss, so November’s figure rises to 492. A low constant keeps the forecast steady and stops one unusual month from swinging the plan.

  1. Exponential smoothing: new forecast = α × latest actual + (1 − α) × latest forecast.
  2. α × actual = 0.3 × 520 = 156.
  3. (1 − α) × forecast = 0.7 × 480 = 336.
  4. November forecast = 156 + 336 = 492.
  5. Shortcut (error-correction form): new forecast = old forecast + α × (actual − old forecast) = 480 + 0.3 × 40 = 480 + 12 = 492.

Why the others are wrong:

  • B (508): 508 is 0.7 × 520 + 0.3 × 480 — the weights swapped, so 70% goes on the latest actual instead of 30%.
  • C (500): 500 is the simple average of 480 and 520, i.e. a smoothing constant of 0.5 instead of 0.3.
  • D (520): 520 is the naïve forecast (next month = this month’s actual), which is the same as α = 1.
  • E (532): 532 is 520 + 0.3 × 40 — the correction added to the actual instead of to the old forecast.

Check: The answer must lie between the old forecast (480) and the actual (520), closer to 480 when α is below 0.5. 492 fits; 508, 520 and 532 do not.

Memory tip: New forecast = old forecast + α × error. Small α = slow, steady forecast; large α = quick to react.

3
A bank’s market-risk team studies five years of daily profit and loss on its bond portfolio. The distribution is almost symmetric, but its coefficient of kurtosis (β₂) works out to 5.2. How should the shape of this distribution be described?
Show answer

Answer: E — Leptokurtic — more peaked with fatter tails than the normal curve.

The idea: A β₂ above 3 means most days are quiet, clustered near the average, but very large gains or losses turn up more often than a normal curve would predict. For a treasury, that warns that a model built on the normal curve will understate the risk of extreme days.

  1. Kurtosis measures peakedness and tail weight, using β₂ = μ₄ ÷ μ₂² (fourth central moment over the square of the variance).
  2. The normal curve has β₂ = 3 and is called mesokurtic.
  3. β₂ > 3 → leptokurtic (taller peak, fatter tails); β₂ < 3 → platykurtic (flatter, thinner tails).
  4. Here β₂ = 5.2 > 3, so the distribution is leptokurtic. Excess kurtosis = 5.2 − 3 = 2.2.

Why the others are wrong:

  • A (Platykurtic — flatter than the normal curve): Platykurtic describes β₂ below 3, a flatter curve with thinner tails — the opposite of a reading of 5.2.
  • B (Mesokurtic — the same peakedness as the normal curve): Mesokurtic describes β₂ = 3, the normal curve itself.
  • C (Positively skewed): Skewness describes lack of symmetry, which is a different measure. The stem says the distribution is almost symmetric, and kurtosis says nothing about the direction of a skew.
  • D (Negatively skewed): Negative skew is also a measure of asymmetry (a longer left tail), not of peakedness. A β₂ figure cannot show it.

Check:

β₂ Excess (β₂ − 3) Name
< 3 negative Platykurtic
= 3 0 Mesokurtic (normal)
> 3 positive Leptokurtic

Memory tip: Lepto = ‘slender’: a tall thin peak with fat tails, β₂ above 3. Skewness is about lean; kurtosis is about peak and tails.

4
Before advertising for credit officers, a bank’s HR department prepares a note stating that a candidate should be a graduate holding the JAIIB certificate, have at least two years’ branch experience, be able to read a balance sheet and be good at talking to customers. What is this note called?
Show answer

Answer: B — Job specification.

The idea: The note describes the person the bank wants — qualifications, experience, skills and traits — not the work itself. That person profile, drawn from job analysis, is the job specification and is what recruiters screen applicants against.

  1. Job analysis produces two outputs.
  2. Job description: what the job involves — title, duties, tasks, reporting line and working conditions.
  3. Job specification: the minimum human qualities needed to do the job — education, experience, skills, knowledge and personal attributes.
  4. The note lists only qualifications, experience and skills, so it is a job specification.

Why the others are wrong:

  • A (Job description): A job description sets out the duties and responsibilities of the post (appraising loan proposals, monitoring accounts, etc.), not the qualities of the person.
  • C (Job evaluation): Job evaluation ranks jobs against each other to fix their relative worth and pay grades.
  • D (Job enrichment): Job enrichment redesigns an existing job to add responsibility and autonomy (vertical loading).
  • E (Job rotation): Job rotation moves employees between jobs at intervals to widen their experience.

Memory tip: Description = the job; specification = the person for the job.

5
A bank’s most experienced recovery officer is about to retire. Much of what he knows about negotiating with defaulting borrowers has never been written down. The bank asks him to write a playbook with case notes and checklists that new officers can use. In the SECI model of knowledge creation, which process is this?
Show answer

Answer: D — Externalisation.

The idea: The bank is taking know-how that lives only in one officer’s head and putting it on paper so that it stays when he leaves. Turning tacit knowledge into explicit, shareable form is externalisation.

  1. The SECI model (Nonaka and Takeuchi) has four modes of knowledge conversion.
  2. Socialisation: tacit → tacit (learning by working alongside someone).
  3. Externalisation: tacit → explicit (writing down or modelling personal know-how).
  4. Combination: explicit → explicit (merging and organising documents and data).
  5. Internalisation: explicit → tacit (learning by doing from written material).
  6. Writing a playbook from personal experience is tacit → explicit, so it is externalisation.

Why the others are wrong:

  • A (Socialisation): Socialisation would be new officers shadowing him on recovery visits and picking up his skills directly, without anything written down.
  • B (Combination): Combination joins existing explicit knowledge, such as compiling several manuals into one policy document.
  • C (Internalisation): Internalisation is the next stage, when new officers read the playbook and absorb it into their own practice.
  • E (Benchmarking): Benchmarking compares the bank’s practices with others’ best practices. It is not one of the four SECI modes.

Memory tip: SECI order: Socialise → Externalise → Combine → Internalise. ‘Write it down’ = Externalise.

6
A borrower seeks a term loan for a plant costing ₹50 lakh. The projected annual cash inflows are ₹12 lakh, ₹15 lakh, ₹18 lakh, ₹20 lakh and ₹22 lakh in Years 1 to 5. What is the payback period of the project?
Show answer

Answer: E — 3.25 years.

The idea: A payback of 3.25 years means the plant earns back its ₹50 lakh cost about three months into Year 4. A banker compares this with the loan’s repayment period: the shorter the payback, the sooner the money is back and the lower the risk.

  1. Payback period = years before full recovery + (amount still to recover ÷ cash inflow of the next year).
  2. Cumulative inflows: Year 1 = 12; Year 2 = 27; Year 3 = 45; Year 4 = 65 (₹ lakh).
  3. After Year 3, ₹45 lakh is recovered; ₹50 − 45 = ₹5 lakh is still outstanding.
  4. Year 4 inflow is ₹20 lakh, so the part-year = 5 ÷ 20 = 0.25.
  5. Payback = 3 + 0.25 = 3.25 years (about 3 years 3 months).

Why the others are wrong:

  • A (2.87 years): 2.87 years is 50 ÷ 17.4, the cost divided by the average annual inflow of all five years. That shortcut works only when inflows are equal.
  • B (3.00 years): 3.00 years counts only the full years and ignores the ₹5 lakh still unrecovered at the end of Year 3.
  • C (4.00 years): 4.00 years is the whole year in which recovery is completed, without working out the fraction of that year.
  • D (3.28 years): 3.28 years is 3 + 5 ÷ 18, dividing the shortfall by the Year 3 inflow instead of the Year 4 inflow.

Check:

Year Inflow (₹ lakh) Cumulative (₹ lakh)
1 12 12
2 15 27
3 18 45
4 20 65
5 22 87

Recovery of ₹50 lakh falls between Year 3 (45) and Year 4 (65).

Memory tip: Uneven inflows: build the cumulative column, find the year it crosses the cost, then divide the gap by the next year’s inflow.

7
The NCLT has admitted a financial creditor’s application and started the corporate insolvency resolution process (CIRP) against a textile company. A bank that holds a mortgage on the company’s factory now wants to take possession of the factory under the SARFAESI Act. What is the position during the CIRP?
Show answer

Answer: A — The bank cannot do so, because the Section 14 moratorium bars enforcement of security interest, including under SARFAESI, during the CIRP.

The idea: Once CIRP starts, the company is given breathing space so that it can be revived as a going concern. No creditor, secured or not, can pick off assets during that period. The bank’s security is protected and its claim is dealt with inside the process.

  1. On admission, the NCLT declares a moratorium under Section 14 of the Insolvency and Bankruptcy Code, 2016.
  2. The moratorium prohibits suits and proceedings against the corporate debtor, transfer of its assets, and any action to foreclose, recover or enforce a security interest, including action under the SARFAESI Act.
  3. It lasts until the CIRP ends: approval of a resolution plan or a liquidation order.
  4. So the bank must file its claim with the resolution professional and take part in the committee of creditors.

Why the others are wrong:

  • B (The bank can go ahead, because a secured creditor stays outside the insolvency process): Secured financial creditors are inside the CIRP: they file claims and sit on the committee of creditors. Their enforcement rights are suspended by the moratorium.
  • C (The bank can go ahead once the interim resolution professional gives consent): The interim resolution professional has no power to lift the moratorium; it is set by the NCLT order under Section 14.
  • D (The bank can go ahead if it holds more than 66% of the voting share in the committee of creditors): A 66% vote in the committee of creditors approves a resolution plan; it does not let one creditor enforce its own security.
  • E (The bank can go ahead after 30 days from the insolvency commencement date): There is no 30-day window. The moratorium runs from the insolvency commencement date to the end of the CIRP.

Memory tip: CIRP admitted → Section 14 moratorium → no SARFAESI, no suits, no asset sales until the process ends.

8
A professional takes an unsecured personal loan. He also owns a flat, and he gives the bank a written undertaking that he will not sell, mortgage or otherwise encumber the flat without the bank’s prior consent while the loan is outstanding. No charge is registered on the flat. What is this arrangement called?
Show answer

Answer: C — Negative lien.

The idea: The bank gets no charge on the flat, only the borrower’s promise to keep it free of other claims. This comfort helps the bank because the asset stays available if recovery is ever needed, but the undertaking is a personal promise and is not security.

  1. A negative lien is an undertaking by the borrower not to sell, transfer or create any charge on a specified asset without the lender’s consent.
  2. No charge, possession or title deed passes to the bank, and nothing is registered as a charge.
  3. It is commonly taken on unencumbered property for clean or unsecured loans.
  4. The undertaking described matches a negative lien.

Why the others are wrong:

  • A (Hypothecation): Hypothecation creates an equitable charge on movable property (such as stock or a vehicle) that stays with the borrower. A flat is immovable, and no charge is created here.
  • B (Banker’s general lien): A banker’s general lien is the right to retain goods or securities that come into the bank’s hands in the ordinary course of banking. The flat never comes into the bank’s hands.
  • D (Pledge): A pledge needs delivery of movable goods to the lender. Nothing is delivered here.
  • E (Equitable mortgage): An equitable mortgage by deposit of title deeds needs the title deeds to be deposited with intent to create security. No deeds are deposited.

Memory tip: Negative lien = ‘I promise not to charge it to anyone else’ — an undertaking, not a charge.

9
During an inspection, a supervisor asks a bank who, in the end, is responsible for overseeing how the bank manages its compliance risk. Which answer reflects sound practice for banks?
Show answer

Answer: D — The Board of Directors.

The idea: Compliance staff run the day-to-day function, but the Board owns the outcome. It approves the compliance policy, makes sure the compliance function is independent and resourced, and checks at least once a year that compliance risk is being managed well.

  1. The Basel Committee’s paper ‘Compliance and the compliance function in banks’ (April 2005) sets out the principles.
  2. Principle 1: the bank’s board of directors is responsible for overseeing the management of the bank’s compliance risk.
  3. Senior management is responsible for managing compliance risk effectively, and the compliance function, led by the CCO, assists them.
  4. RBI’s framework for the compliance function in banks follows the same board-oversight approach.

Why the others are wrong:

  • A (The Chief Compliance Officer): The CCO heads the compliance function and helps management identify, assess and report compliance risk, but reports to the Board on it rather than carrying the final oversight responsibility.
  • B (The internal audit department): Internal audit independently reviews whether the compliance function works. It does not own compliance risk.
  • C (The heads of each business line): Business line heads must follow the rules in their own areas (first line of defence), but they do not oversee the bank’s compliance risk as a whole.
  • E (The RBI’s supervisory team assigned to the bank): The RBI supervises the bank from outside. Responsibility for the bank’s own compliance risk stays with its Board.

Memory tip: Board oversees, senior management manages, compliance function assists, internal audit checks.

10
A fast-growing non-deposit-taking NBFC asks its compliance head whether it could be moved into the RBI’s stricter Upper Layer even if it scores low on interconnectedness and complexity. The compliance head explains that one group of NBFCs is put in that layer on size rank alone. Which group is it?
Show answer

Answer: B — The top ten eligible NBFCs ranked by asset size.

The idea: The Upper Layer is for NBFCs large or connected enough to matter for the whole financial system. The RBI picks them mainly by a scoring method, but the ten biggest eligible NBFCs by assets are placed there automatically, so size alone can bring the stricter rules.

  1. The framework has four layers: Base, Middle, Upper and a Top layer that is ideally kept empty.
  2. The Upper Layer covers NBFCs the RBI specifically identifies as needing enhanced regulation, using a scoring method based on size, interconnectedness, complexity and similar parameters.
  3. The framework adds that the top ten eligible NBFCs by asset size will always be in the Upper Layer, irrespective of their score.
  4. So size rank alone places the top ten in the Upper Layer.

Why the others are wrong:

  • A (All deposit-taking NBFCs): Deposit-taking NBFCs are placed at least in the Middle Layer, not automatically in the Upper Layer.
  • C (All NBFCs with assets of ₹1,000 crore and above): An asset size of ₹1,000 crore and above is the threshold for the Middle Layer for non-deposit-taking NBFCs, not for automatic Upper Layer status.
  • D (All government-owned NBFCs): Government-owned NBFCs are placed in the Base or Middle Layer and are not automatically in the Upper Layer.
  • E (All peer-to-peer lending platforms (NBFC-P2P)): NBFC-P2P platforms sit in the Base Layer.

Memory tip: Top ten by assets = always Upper Layer. ₹1,000 crore = Middle Layer line.

Topics covered today

  • Module A — Statistics: Measures of Central Tendency — Harmonic Mean; Time Series and Forecasting — Exponential Smoothing; Skewness and Kurtosis
  • Module B — Human Resource Management: Job Analysis; Knowledge Management
  • Module C — Credit Management: Term Loans and Project Appraisal; Resolution of Stressed Assets under IBC 2016 — Moratorium; Credit Delivery — Modes of Charge
  • Module D — Compliance in Banks & Corporate Governance: Compliance Function in Banks — Board Oversight; NBFC Regulation — Scale-Based Regulation

Tomorrow’s post continues the series with another fresh set of 10 CAIIB Advanced Bank Management practice questions. Bookmark SimplifyingFin and revise one set a day.

Next: CAIIB ABM MCQ Practice Day 7

Disclaimer: This quiz is an independent practice aid for educational purposes. It is not affiliated with, endorsed by, or published by IIBF. Always cross-check regulations and circulars from official RBI/IIBF sources before relying on any figure in an exam or at work.

Scroll to Top