This CAIIB ABM MCQ set is for bankers preparing for the IIBF CAIIB Advanced Bank Management paper. Attempt all 10 questions below—tap an option to see whether you are right, then read the short explanation. These are SimplifyingFin practice questions, not official IIBF questions.
Part of the CAIIB ABM MCQ practice series. Previous: Day 6
CAIIB ABM MCQ Day 7 quiz: 10 questions
Show answer
Answer: A — 46.
The idea: The mean (52) sits above the median (50), so a few very large withdrawal days pull the average up: the data are positively skewed. In such data the most common value, the mode, lies on the other side of the median, below it. The empirical rule puts it at about ₹46 thousand.
- Karl Pearson’s empirical relationship for moderately skewed data: Mode ≈ 3 × Median − 2 × Mean.
- 3 × Median = 3 × 50 = 150.
- 2 × Mean = 2 × 52 = 104.
- Mode ≈ 150 − 104 = 46 (₹46 thousand).
- Shortcut: Mean − Mode ≈ 3 × (Mean − Median) = 3 × 2 = 6, so Mode ≈ 52 − 6 = 46.
Why the others are wrong:
- B (56): 56 is 3 × Mean − 2 × Median (156 − 100): the mean and median have been swapped in the relationship, which pushes the mode above the mean instead of below the median.
- C (51): 51 is the simple average of the mean and median, (52 + 50) ÷ 2. The empirical rule does not average the two.
- D (48): 48 is 2 × Median − Mean (100 − 52). It moves only one gap below the median; the rule needs the mode to be three gaps away from the mean.
- E (50): 50 is the median itself. Mode, median and mean coincide only in a symmetrical distribution, and here mean ≠ median.
Check:
| Average | Value (₹ thousand) |
|---|---|
| Mode (empirical) | 46 |
| Median | 50 |
| Mean | 52 |
Order Mode < Median < Mean confirms positive skew. Mean − Mode = 6 = 3 × (Mean − Median).
Memory tip: Median sits between the other two, about one-third of the way from the mean to the mode.
Answer: A — 46.
The idea: The mean (52) sits above the median (50), so a few very large withdrawal days pull the average up: the data are positively skewed. In such data the most common value, the mode, lies on the other side of the median, below it. The empirical rule puts it at about ₹46 thousand.
- Karl Pearson’s empirical relationship for moderately skewed data: Mode ≈ 3 × Median − 2 × Mean.
- 3 × Median = 3 × 50 = 150.
- 2 × Mean = 2 × 52 = 104.
- Mode ≈ 150 − 104 = 46 (₹46 thousand).
- Shortcut: Mean − Mode ≈ 3 × (Mean − Median) = 3 × 2 = 6, so Mode ≈ 52 − 6 = 46.
Why the others are wrong:
- B (56): 56 is 3 × Mean − 2 × Median (156 − 100): the mean and median have been swapped in the relationship, which pushes the mode above the mean instead of below the median.
- C (51): 51 is the simple average of the mean and median, (52 + 50) ÷ 2. The empirical rule does not average the two.
- D (48): 48 is 2 × Median − Mean (100 − 52). It moves only one gap below the median; the rule needs the mode to be three gaps away from the mean.
- E (50): 50 is the median itself. Mode, median and mean coincide only in a symmetrical distribution, and here mean ≠ median.
Check:
| Average | Value (₹ thousand) |
|---|---|
| Mode (empirical) | 46 |
| Median | 50 |
| Mean | 52 |
Order Mode < Median < Mean confirms positive skew. Mean − Mode = 6 = 3 × (Mean − Median).
Memory tip: Median sits between the other two, about one-third of the way from the mean to the mode.
Show answer
Answer: C — ₹63,020 to ₹64,980.
The idea: The bank cannot check every account, so it gives a range that, by a method that is right 95 times out of 100, captures the true branch average. With 100 accounts the sample average is fairly precise, so the range is only about ±₹1,000.
- For a large sample, 95% confidence interval = x̄ ± 1.96 × (s ÷ √n).
- Standard error = 5,000 ÷ √100 = 5,000 ÷ 10 = ₹500.
- Margin of error = 1.96 × 500 = ₹980.
- Lower limit = 64,000 − 980 = ₹63,020. Upper limit = 64,000 + 980 = ₹64,980.
Why the others are wrong:
- A (₹63,500 to ₹64,500): ₹63,500 to ₹64,500 is x̄ ± 1 standard error (±500). One standard error gives only about 68% confidence.
- B (₹54,200 to ₹73,800): ₹54,200 to ₹73,800 is x̄ ± 1.96 × 5,000: the standard deviation of individual balances was used without dividing by √n.
- D (₹62,712 to ₹65,288): ₹62,712 to ₹65,288 uses z = 2.576 (±1,288), which is the 99% interval, not 95%.
- E (₹63,177.5 to ₹64,822.5): ₹63,177.5 to ₹64,822.5 uses z = 1.645 (±822.5), which is the 90% interval.
Check:
| Confidence level | z | Margin (₹) | Interval (₹) |
|---|---|---|---|
| 68% | 1.000 | 500 | 63,500 – 64,500 |
| 90% | 1.645 | 822.5 | 63,177.5 – 64,822.5 |
| 95% | 1.960 | 980 | 63,020 – 64,980 |
| 99% | 2.576 | 1,288 | 62,712 – 65,288 |
Memory tip: Divide by √n first, then multiply by z. 95% → 1.96, 99% → 2.576, 90% → 1.645.
Answer: C — ₹63,020 to ₹64,980.
The idea: The bank cannot check every account, so it gives a range that, by a method that is right 95 times out of 100, captures the true branch average. With 100 accounts the sample average is fairly precise, so the range is only about ±₹1,000.
- For a large sample, 95% confidence interval = x̄ ± 1.96 × (s ÷ √n).
- Standard error = 5,000 ÷ √100 = 5,000 ÷ 10 = ₹500.
- Margin of error = 1.96 × 500 = ₹980.
- Lower limit = 64,000 − 980 = ₹63,020. Upper limit = 64,000 + 980 = ₹64,980.
Why the others are wrong:
- A (₹63,500 to ₹64,500): ₹63,500 to ₹64,500 is x̄ ± 1 standard error (±500). One standard error gives only about 68% confidence.
- B (₹54,200 to ₹73,800): ₹54,200 to ₹73,800 is x̄ ± 1.96 × 5,000: the standard deviation of individual balances was used without dividing by √n.
- D (₹62,712 to ₹65,288): ₹62,712 to ₹65,288 uses z = 2.576 (±1,288), which is the 99% interval, not 95%.
- E (₹63,177.5 to ₹64,822.5): ₹63,177.5 to ₹64,822.5 uses z = 1.645 (±822.5), which is the 90% interval.
Check:
| Confidence level | z | Margin (₹) | Interval (₹) |
|---|---|---|---|
| 68% | 1.000 | 500 | 63,500 – 64,500 |
| 90% | 1.645 | 822.5 | 63,177.5 – 64,822.5 |
| 95% | 1.960 | 980 | 63,020 – 64,980 |
| 99% | 2.576 | 1,288 | 62,712 – 65,288 |
Memory tip: Divide by √n first, then multiply by z. 95% → 1.96, 99% → 2.576, 90% → 1.645.
Show answer
Answer: E — Monte Carlo simulation.
The idea: Nobody can watch the new counter before it opens, so the analyst lets a computer ‘play out’ many imaginary days. Random numbers stand in for the uncertain arrivals and service times; the spread of results shows the likely waiting time and how bad a bad day could be.
- Monte Carlo simulation builds a model of a process with uncertain inputs, each described by a probability distribution.
- Random numbers are drawn to pick input values (for example the gap between arrivals and the time taken to serve each customer).
- The model is run for one trial (one simulated day) and the output, here the waiting time, is recorded.
- Many trials are repeated; the collection of outputs gives an average and a distribution of waiting times for decision-making (for example, whether to add a second counter).
Why the others are wrong:
- A (Linear programming): Linear programming finds the best value of an objective (profit, cost) under linear constraints. It does not use random numbers to imitate uncertain events.
- B (Exponential smoothing): Exponential smoothing forecasts the next value of a time series from past actuals and forecasts. It does not generate imaginary trials.
- C (Regression analysis): Regression analysis estimates how one variable changes with another from observed data. It does not model a queue trial by trial.
- D (Stratified random sampling): Stratified random sampling is a way of selecting a sample from a real population divided into groups. Here no real population is being sampled.
Memory tip: Random numbers + many trials + a model of an uncertain process = Monte Carlo simulation.
Answer: E — Monte Carlo simulation.
The idea: Nobody can watch the new counter before it opens, so the analyst lets a computer ‘play out’ many imaginary days. Random numbers stand in for the uncertain arrivals and service times; the spread of results shows the likely waiting time and how bad a bad day could be.
- Monte Carlo simulation builds a model of a process with uncertain inputs, each described by a probability distribution.
- Random numbers are drawn to pick input values (for example the gap between arrivals and the time taken to serve each customer).
- The model is run for one trial (one simulated day) and the output, here the waiting time, is recorded.
- Many trials are repeated; the collection of outputs gives an average and a distribution of waiting times for decision-making (for example, whether to add a second counter).
Why the others are wrong:
- A (Linear programming): Linear programming finds the best value of an objective (profit, cost) under linear constraints. It does not use random numbers to imitate uncertain events.
- B (Exponential smoothing): Exponential smoothing forecasts the next value of a time series from past actuals and forecasts. It does not generate imaginary trials.
- C (Regression analysis): Regression analysis estimates how one variable changes with another from observed data. It does not model a queue trial by trial.
- D (Stratified random sampling): Stratified random sampling is a way of selecting a sample from a real population divided into groups. Here no real population is being sampled.
Memory tip: Random numbers + many trials + a model of an uncertain process = Monte Carlo simulation.
Show answer
Answer: B — Best alternative to a negotiated agreement (BATNA).
The idea: A negotiator who knows what she will do if talks fail is not forced to accept a bad deal. That best fallback, the BATNA, tells her when walking away is better than agreeing.
- BATNA (from Fisher and Ury’s principled negotiation) is the best course of action a party can take if the negotiation fails.
- It sets the walk-away (reservation) point: any offer worse than the BATNA should be rejected.
- A strong BATNA gives bargaining power; improving one’s BATNA before talks is a recognised preparation step.
- Here the HR head has listed the fallbacks and chosen the best one to fix her limit, which is exactly a BATNA.
Why the others are wrong:
- A (Zone of possible agreement (ZOPA)): ZOPA is the overlap between both parties’ acceptable ranges where a deal is possible. It needs both sides’ limits, not one side’s fallback.
- C (Anchor): An anchor is the first figure put on the table to shape the other side’s expectations, not the fallback if talks fail.
- D (Distributive bargaining position): Distributive bargaining is a fixed-pie, win–lose style of negotiating. It describes the type of negotiation, not the fallback option.
- E (Integrative bargaining outcome): An integrative outcome is a win–win agreement that expands value for both sides. It is a result of agreement, while BATNA applies when there is no agreement.
Memory tip: BATNA = your best ‘Plan B’ if there is no deal; it fixes your walk-away point.
Answer: B — Best alternative to a negotiated agreement (BATNA).
The idea: A negotiator who knows what she will do if talks fail is not forced to accept a bad deal. That best fallback, the BATNA, tells her when walking away is better than agreeing.
- BATNA (from Fisher and Ury’s principled negotiation) is the best course of action a party can take if the negotiation fails.
- It sets the walk-away (reservation) point: any offer worse than the BATNA should be rejected.
- A strong BATNA gives bargaining power; improving one’s BATNA before talks is a recognised preparation step.
- Here the HR head has listed the fallbacks and chosen the best one to fix her limit, which is exactly a BATNA.
Why the others are wrong:
- A (Zone of possible agreement (ZOPA)): ZOPA is the overlap between both parties’ acceptable ranges where a deal is possible. It needs both sides’ limits, not one side’s fallback.
- C (Anchor): An anchor is the first figure put on the table to shape the other side’s expectations, not the fallback if talks fail.
- D (Distributive bargaining position): Distributive bargaining is a fixed-pie, win–lose style of negotiating. It describes the type of negotiation, not the fallback option.
- E (Integrative bargaining outcome): An integrative outcome is a win–win agreement that expands value for both sides. It is a result of agreement, while BATNA applies when there is no agreement.
Memory tip: BATNA = your best ‘Plan B’ if there is no deal; it fixes your walk-away point.
Show answer
Answer: D — Behavioural Event Interview (BEI).
The idea: Instead of asking what someone would do, the interviewer digs into what she actually did in real past events. Patterns across these stories reveal the competencies that separate star performers from average ones.
- The Behavioural Event Interview (developed from the critical incident technique and associated with McClelland’s competency work) asks the person to recall specific past events in detail.
- For each event the interviewer probes the context, the person’s thoughts and feelings, what she said and did, and the outcome.
- Transcripts are coded for competencies such as initiative, influence or analytical thinking.
- Comparing outstanding and average performers shows which competencies drive success, which feeds the bank’s competency framework.
Why the others are wrong:
- A (Assessment centre): An assessment centre uses several exercises (in-tray, group discussion, role-play) observed by several assessors. Here there is a single interview about real past events.
- B (360-degree feedback): 360-degree feedback collects ratings from superiors, peers, subordinates and others. It does not involve the person narrating incidents.
- C (Stress interview): A stress interview deliberately puts the candidate under pressure to see how she copes. Nothing here is designed to create stress.
- E (Situational interview based on hypothetical cases): A situational interview asks what the person would do in an imagined future situation. BEI asks about real past behaviour.
Memory tip: BEI = Behaviour in real Events: past, specific, in her own words.
Answer: D — Behavioural Event Interview (BEI).
The idea: Instead of asking what someone would do, the interviewer digs into what she actually did in real past events. Patterns across these stories reveal the competencies that separate star performers from average ones.
- The Behavioural Event Interview (developed from the critical incident technique and associated with McClelland’s competency work) asks the person to recall specific past events in detail.
- For each event the interviewer probes the context, the person’s thoughts and feelings, what she said and did, and the outcome.
- Transcripts are coded for competencies such as initiative, influence or analytical thinking.
- Comparing outstanding and average performers shows which competencies drive success, which feeds the bank’s competency framework.
Why the others are wrong:
- A (Assessment centre): An assessment centre uses several exercises (in-tray, group discussion, role-play) observed by several assessors. Here there is a single interview about real past events.
- B (360-degree feedback): 360-degree feedback collects ratings from superiors, peers, subordinates and others. It does not involve the person narrating incidents.
- C (Stress interview): A stress interview deliberately puts the candidate under pressure to see how she copes. Nothing here is designed to create stress.
- E (Situational interview based on hypothetical cases): A situational interview asks what the person would do in an imagined future situation. BEI asks about real past behaviour.
Memory tip: BEI = Behaviour in real Events: past, specific, in her own words.
Show answer
Answer: B — 60 days.
The idea: On average the borrower waits about two months to be paid by its customers. A banker compares this with the credit period the unit allows and with past years: a rising figure can mean slow-paying buyers and more working capital locked up.
- Average collection period = Average trade receivables ÷ Credit sales × 365 days.
- Use credit sales only, because cash sales never create debtors: ₹7.30 crore.
- 1.20 ÷ 7.30 = 0.164384.
- 0.164384 × 365 = 60 days.
- Check via turnover: debtors turnover = 7.30 ÷ 1.20 ≈ 6.08 times; 365 ÷ 6.08 ≈ 60 days.
Why the others are wrong:
- A (48 days): 48 days uses total sales: 1.20 ÷ 9.125 × 365. Cash sales do not generate receivables, so including them understates the collection period.
- C (59.2 days): 59.2 days uses a 360-day year: 1.20 ÷ 7.30 × 360. The question specifies 365 days.
- D (6.1 days): 6.1 is the debtors turnover ratio, 7.30 ÷ 1.20 ≈ 6.08 times a year. It is a number of times, not days.
- E (2.0 days): 2.0 is the collection period in months, 1.20 ÷ 7.30 × 12 ≈ 1.97, wrongly labelled as days.
Check:
| Measure | Working | Result |
|---|---|---|
| Debtors turnover | 7.30 ÷ 1.20 | ≈ 6.08 times |
| Collection period | 365 ÷ 6.08 | ≈ 60 days |
| In months | 1.20 ÷ 7.30 × 12 | ≈ 1.97 months |
Memory tip: Debtors come only from credit sales, so divide by credit sales, then multiply by the days in the year.
Answer: B — 60 days.
The idea: On average the borrower waits about two months to be paid by its customers. A banker compares this with the credit period the unit allows and with past years: a rising figure can mean slow-paying buyers and more working capital locked up.
- Average collection period = Average trade receivables ÷ Credit sales × 365 days.
- Use credit sales only, because cash sales never create debtors: ₹7.30 crore.
- 1.20 ÷ 7.30 = 0.164384.
- 0.164384 × 365 = 60 days.
- Check via turnover: debtors turnover = 7.30 ÷ 1.20 ≈ 6.08 times; 365 ÷ 6.08 ≈ 60 days.
Why the others are wrong:
- A (48 days): 48 days uses total sales: 1.20 ÷ 9.125 × 365. Cash sales do not generate receivables, so including them understates the collection period.
- C (59.2 days): 59.2 days uses a 360-day year: 1.20 ÷ 7.30 × 360. The question specifies 365 days.
- D (6.1 days): 6.1 is the debtors turnover ratio, 7.30 ÷ 1.20 ≈ 6.08 times a year. It is a number of times, not days.
- E (2.0 days): 2.0 is the collection period in months, 1.20 ÷ 7.30 × 12 ≈ 1.97, wrongly labelled as days.
Check:
| Measure | Working | Result |
|---|---|---|
| Debtors turnover | 7.30 ÷ 1.20 | ≈ 6.08 times |
| Collection period | 365 ÷ 6.08 | ≈ 60 days |
| In months | 1.20 ÷ 7.30 × 12 | ≈ 1.97 months |
Memory tip: Debtors come only from credit sales, so divide by credit sales, then multiply by the days in the year.
Show answer
Answer: E — Section 9.
The idea: A supplier owed money for goods or services is an operational creditor, not a lender. The Code gives such creditors their own route, which starts with a demand notice so that genuine disputes can be raised before the company is pushed into insolvency.
- A debt arising from the supply of goods or services is an operational debt, so the supplier is an operational creditor (Section 5(20)–(21) of the IBC).
- Section 8: the operational creditor first delivers a demand notice; the corporate debtor has 10 days to pay or point out a pre-existing dispute.
- Section 9: if there is no payment and no notice of dispute, the operational creditor may file an application with the NCLT to initiate CIRP.
- Here the notice went unanswered and the default exceeds the threshold, so the application is under Section 9.
Why the others are wrong:
- A (Section 7): Section 7 is for financial creditors, such as banks that lent money against the time value of money. A goods supplier is not a financial creditor.
- B (Section 10): Section 10 is for the corporate debtor itself (a corporate applicant) to start its own insolvency process.
- C (Section 12): Section 12 sets the time limit for completing the CIRP. It is not the section under which an application is filed.
- D (Section 33): Section 33 deals with the NCLT ordering liquidation of the corporate debtor, which comes later, if resolution fails.
Memory tip: Lender → Section 7; supplier → Sections 8 and 9; company itself → Section 10.
Answer: E — Section 9.
The idea: A supplier owed money for goods or services is an operational creditor, not a lender. The Code gives such creditors their own route, which starts with a demand notice so that genuine disputes can be raised before the company is pushed into insolvency.
- A debt arising from the supply of goods or services is an operational debt, so the supplier is an operational creditor (Section 5(20)–(21) of the IBC).
- Section 8: the operational creditor first delivers a demand notice; the corporate debtor has 10 days to pay or point out a pre-existing dispute.
- Section 9: if there is no payment and no notice of dispute, the operational creditor may file an application with the NCLT to initiate CIRP.
- Here the notice went unanswered and the default exceeds the threshold, so the application is under Section 9.
Why the others are wrong:
- A (Section 7): Section 7 is for financial creditors, such as banks that lent money against the time value of money. A goods supplier is not a financial creditor.
- B (Section 10): Section 10 is for the corporate debtor itself (a corporate applicant) to start its own insolvency process.
- C (Section 12): Section 12 sets the time limit for completing the CIRP. It is not the section under which an application is filed.
- D (Section 33): Section 33 deals with the NCLT ordering liquidation of the corporate debtor, which comes later, if resolution fails.
Memory tip: Lender → Section 7; supplier → Sections 8 and 9; company itself → Section 10.
Show answer
Answer: A — Consortium lending.
The idea: Spreading a big exposure across several banks keeps each bank’s risk within limits, while a single appraisal, common documents and a shared charge avoid five banks working at cross-purposes.
- In consortium lending, two or more banks jointly finance a borrower under one arrangement.
- A lead bank does the appraisal and coordinates the consortium; the other members share the facility in agreed proportions.
- The banks use common loan documents and share security, usually by a pari passu charge on the assets financed.
- These features — joint appraisal, common documents and shared security — distinguish a consortium from separate dealings with several banks.
Why the others are wrong:
- B (Multiple banking arrangement): Under a multiple banking arrangement, each bank lends separately with its own appraisal, documents and security. There is no common appraisal or common documents.
- C (Loan participation by a single bank selling down its exposure): In a loan participation the single lender keeps the borrower relationship and sells down part of its exposure to others; the borrower deals with one bank only.
- D (Bill rediscounting): Bill rediscounting is a bank rediscounting bills it has already discounted with another bank or institution. It is not a joint credit facility to a borrower.
- E (Inter-bank participation certificate with risk sharing): An inter-bank participation certificate (IBPC) transfers part of a bank’s loan asset to another bank. The borrower does not sign common documents with all the banks.
Memory tip: Consortium = one appraisal, common documents, shared charge, many banks.
Answer: A — Consortium lending.
The idea: Spreading a big exposure across several banks keeps each bank’s risk within limits, while a single appraisal, common documents and a shared charge avoid five banks working at cross-purposes.
- In consortium lending, two or more banks jointly finance a borrower under one arrangement.
- A lead bank does the appraisal and coordinates the consortium; the other members share the facility in agreed proportions.
- The banks use common loan documents and share security, usually by a pari passu charge on the assets financed.
- These features — joint appraisal, common documents and shared security — distinguish a consortium from separate dealings with several banks.
Why the others are wrong:
- B (Multiple banking arrangement): Under a multiple banking arrangement, each bank lends separately with its own appraisal, documents and security. There is no common appraisal or common documents.
- C (Loan participation by a single bank selling down its exposure): In a loan participation the single lender keeps the borrower relationship and sells down part of its exposure to others; the borrower deals with one bank only.
- D (Bill rediscounting): Bill rediscounting is a bank rediscounting bills it has already discounted with another bank or institution. It is not a joint credit facility to a borrower.
- E (Inter-bank participation certificate with risk sharing): An inter-bank participation certificate (IBPC) transfers part of a bank’s loan asset to another bank. The borrower does not sign common documents with all the banks.
Memory tip: Consortium = one appraisal, common documents, shared charge, many banks.
Show answer
Answer: D — Risk-Based Internal Audit (RBIA).
The idea: Auditors are limited in number, so the bank sends them where trouble is most likely. A branch with large advances and many past irregularities gets more audit attention than a small, clean one.
- Risk-Based Internal Audit starts with a risk assessment of business units and processes (inherent business risk and control risk).
- Audit frequency, scope and depth are then decided by the assessed risk rating.
- The audit also evaluates the risk management and control systems, not only individual transactions.
- RBI has asked banks to adopt RBIA so that internal audit adds independent assurance on risk management — the third line of defence.
Why the others are wrong:
- A (Concurrent audit): Concurrent audit is a continuous, near-real-time check of transactions at selected branches or departments. It does not by itself set audit effort by risk rating across the bank.
- B (Statutory central audit): Statutory audit is the annual audit of financial statements by external auditors appointed under law. It is not the internal audit plan.
- C (Snap audit): A snap audit is a short surprise check of a particular area. It describes a single visit, not a risk-weighted audit plan.
- E (Transaction-based compliance testing of every voucher): Checking every voucher equally is transaction-based auditing, the opposite of focusing effort on high-risk areas.
Memory tip: RBIA: risk rating first, then audit frequency and depth follow the rating.
Answer: D — Risk-Based Internal Audit (RBIA).
The idea: Auditors are limited in number, so the bank sends them where trouble is most likely. A branch with large advances and many past irregularities gets more audit attention than a small, clean one.
- Risk-Based Internal Audit starts with a risk assessment of business units and processes (inherent business risk and control risk).
- Audit frequency, scope and depth are then decided by the assessed risk rating.
- The audit also evaluates the risk management and control systems, not only individual transactions.
- RBI has asked banks to adopt RBIA so that internal audit adds independent assurance on risk management — the third line of defence.
Why the others are wrong:
- A (Concurrent audit): Concurrent audit is a continuous, near-real-time check of transactions at selected branches or departments. It does not by itself set audit effort by risk rating across the bank.
- B (Statutory central audit): Statutory audit is the annual audit of financial statements by external auditors appointed under law. It is not the internal audit plan.
- C (Snap audit): A snap audit is a short surprise check of a particular area. It describes a single visit, not a risk-weighted audit plan.
- E (Transaction-based compliance testing of every voucher): Checking every voucher equally is transaction-based auditing, the opposite of focusing effort on high-risk areas.
Memory tip: RBIA: risk rating first, then audit frequency and depth follow the rating.
Show answer
Answer: C — Red Flagged Account (RFA).
The idea: Fraud is rarely obvious on day one. The red flag tag lets the bank investigate early, on suspicion, before the money vanishes, instead of waiting until the account turns bad.
- RBI’s framework on fraud risk management requires banks to run an early warning signal (EWS) system for loan accounts.
- When EWS indicators point to possible fraudulent activity, the account is classified as a Red Flagged Account.
- The bank then examines the account (for example through an investigation or forensic audit) and decides whether to classify it as fraud or remove the red flag.
- The tag depends on suspicion of fraud, not on how many days the loan is overdue.
Why the others are wrong:
- A (SMA-2 account): SMA-2 is a stress category based on overdues of 61–90 days. It is driven by repayment delays, not by suspicion of fraud.
- B (Wilful defaulter): A wilful defaulter is a borrower formally declared so after the prescribed process, for example for not paying despite having the capacity. It is a final classification, not an early tag.
- D (Doubtful asset): Doubtful is an asset classification for NPAs based on time in the sub-standard category. It does not depend on fraud indicators.
- E (Non-cooperative borrower): A non-cooperative borrower is one who deliberately avoids engaging with lenders on repayment or resolution. It is a separate concept from suspected fraud.
Memory tip: RFA = Red flag on Fraud suspicion, Ahead of confirmation.
Answer: C — Red Flagged Account (RFA).
The idea: Fraud is rarely obvious on day one. The red flag tag lets the bank investigate early, on suspicion, before the money vanishes, instead of waiting until the account turns bad.
- RBI’s framework on fraud risk management requires banks to run an early warning signal (EWS) system for loan accounts.
- When EWS indicators point to possible fraudulent activity, the account is classified as a Red Flagged Account.
- The bank then examines the account (for example through an investigation or forensic audit) and decides whether to classify it as fraud or remove the red flag.
- The tag depends on suspicion of fraud, not on how many days the loan is overdue.
Why the others are wrong:
- A (SMA-2 account): SMA-2 is a stress category based on overdues of 61–90 days. It is driven by repayment delays, not by suspicion of fraud.
- B (Wilful defaulter): A wilful defaulter is a borrower formally declared so after the prescribed process, for example for not paying despite having the capacity. It is a final classification, not an early tag.
- D (Doubtful asset): Doubtful is an asset classification for NPAs based on time in the sub-standard category. It does not depend on fraud indicators.
- E (Non-cooperative borrower): A non-cooperative borrower is one who deliberately avoids engaging with lenders on repayment or resolution. It is a separate concept from suspected fraud.
Memory tip: RFA = Red flag on Fraud suspicion, Ahead of confirmation.
Topics covered today
- Module A — Statistics: Measures of Central Tendency — Empirical Mode; Estimation — Confidence Interval for the Mean; Simulation
- Module B — Human Resource Management: Conflict and Negotiation — BATNA; Competency Mapping — Behavioural Event Interview
- Module C — Credit Management: Analysis of Financial Statements — Debtors Collection Period; Resolution of Stressed Assets under IBC 2016 — Who Files; Credit Delivery — Consortium Lending
- Module D — Compliance in Banks & Corporate Governance: Compliance Audit — Risk-Based Internal Audit; Fraud and Vigilance — Red Flagged Account
Tomorrow’s post continues the series with another fresh set of 10 CAIIB Advanced Bank Management practice questions. Bookmark SimplifyingFin and revise one set a day.
Disclaimer: This quiz is an independent practice aid for educational purposes. It is not affiliated with, endorsed by, or published by IIBF. Always cross-check regulations and circulars from official RBI/IIBF sources before relying on any figure in an exam or at work.

