This CAIIB ABM MCQ set is for bankers preparing for the IIBF CAIIB Advanced Bank Management paper. Attempt all 10 questions below—tap an option to see whether you are right, then read the short explanation. These are SimplifyingFin practice questions, not official IIBF questions.
Part of the CAIIB ABM MCQ practice series. Previous: Day 3
CAIIB ABM MCQ Day 4 quiz: 10 questions
Show answer
Answer: C — 0.80.
The idea: r = 0.80 says months with more field visits clearly tend to be months with higher recoveries — a strong positive straight-line link. Squaring it (0.64) tells the cell that about 64% of the month-to-month swing in recoveries moves together with visits. It does not prove the visits cause the recoveries.
- Karl Pearson’s r = Cov(X, Y) ÷ (SD of X × SD of Y).
- Multiply the two standard deviations: 5 × 9 = 45.
- Divide: r = 36 ÷ 45 = 0.80.
- Shortcut: 36 ÷ 45 — divide both by 9 to get 4 ÷ 5 = 0.8. Sanity check: r must lie between −1 and +1.
Why the others are wrong:
- A (1.44): 1.44 is Cov ÷ Var(X) = 36 ÷ 25, the regression slope of Y on X (b_yx), not r. A correlation can never exceed 1.
- B (0.64): 0.64 is r² = 0.80 × 0.80, the coefficient of determination, not r itself.
- D (0.44): 0.44 is Cov ÷ Var(Y) = 36 ÷ 81 ≈ 0.444, the regression slope of X on Y (b_xy), not r.
- E (2.57): 2.57 is 36 ÷ (5 + 9) = 36 ÷ 14 — the covariance divided by the sum of the SDs instead of their product. It is also above 1, so it cannot be a correlation.
Check:
| Quantity | Working | Value |
|---|---|---|
| r | 36 ÷ (5 × 9) | 0.80 |
| b_yx (Y on X) | 36 ÷ 5² | 1.44 |
| b_xy (X on Y) | 36 ÷ 9² | 0.444 |
| r² | 0.80² | 0.64 |
Check: b_yx × b_xy = 1.44 × 0.444 = 0.64 = r².
Memory tip: Correlation divides by the product of the two SDs; a regression slope divides by one variance. If your “r” is above 1, you have found a slope.
Answer: C — 0.80.
The idea: r = 0.80 says months with more field visits clearly tend to be months with higher recoveries — a strong positive straight-line link. Squaring it (0.64) tells the cell that about 64% of the month-to-month swing in recoveries moves together with visits. It does not prove the visits cause the recoveries.
- Karl Pearson’s r = Cov(X, Y) ÷ (SD of X × SD of Y).
- Multiply the two standard deviations: 5 × 9 = 45.
- Divide: r = 36 ÷ 45 = 0.80.
- Shortcut: 36 ÷ 45 — divide both by 9 to get 4 ÷ 5 = 0.8. Sanity check: r must lie between −1 and +1.
Why the others are wrong:
- A (1.44): 1.44 is Cov ÷ Var(X) = 36 ÷ 25, the regression slope of Y on X (b_yx), not r. A correlation can never exceed 1.
- B (0.64): 0.64 is r² = 0.80 × 0.80, the coefficient of determination, not r itself.
- D (0.44): 0.44 is Cov ÷ Var(Y) = 36 ÷ 81 ≈ 0.444, the regression slope of X on Y (b_xy), not r.
- E (2.57): 2.57 is 36 ÷ (5 + 9) = 36 ÷ 14 — the covariance divided by the sum of the SDs instead of their product. It is also above 1, so it cannot be a correlation.
Check:
| Quantity | Working | Value |
|---|---|---|
| r | 36 ÷ (5 × 9) | 0.80 |
| b_yx (Y on X) | 36 ÷ 5² | 1.44 |
| b_xy (X on Y) | 36 ÷ 9² | 0.444 |
| r² | 0.80² | 0.64 |
Check: b_yx × b_xy = 1.44 × 0.444 = 0.64 = r².
Memory tip: Correlation divides by the product of the two SDs; a regression slope divides by one variance. If your “r” is above 1, you have found a slope.
Show answer
Answer: E — ₹2,000.
The idea: Single accounts swing by about ₹12,000, but the average of 36 accounts is far steadier: it typically misses the true average balance by only about ₹2,000. That is why sample averages, not single accounts, are used for estimates.
- Standard error of the mean = population SD ÷ √(sample size).
- √36 = 6.
- ₹12,000 ÷ 6 = ₹2,000.
- Shortcut: to halve the standard error you need four times the sample (√4 = 2). So 144 accounts would give ₹1,000.
Why the others are wrong:
- A (₹333): ₹333 is ₹12,000 ÷ 36 — dividing by the sample size instead of its square root.
- B (₹12,000): ₹12,000 is the SD of a single account’s balance. It ignores the steadying effect of averaging 36 accounts.
- C (₹72,000): ₹72,000 is ₹12,000 × 6 — multiplying by √n instead of dividing.
- D (₹3,920): ₹3,920 is 1.96 × ₹2,000, the 95% margin of error around the sample mean, not the standard error itself.
Check: SE = 12,000 ÷ √36 = 12,000 ÷ 6 = ₹2,000. A 95% interval would be the sample mean ± 1.96 × 2,000 = ± ₹3,920 (option D).
Memory tip: Standard error = SD ÷ √n. Square root of n, never n itself.
Answer: E — ₹2,000.
The idea: Single accounts swing by about ₹12,000, but the average of 36 accounts is far steadier: it typically misses the true average balance by only about ₹2,000. That is why sample averages, not single accounts, are used for estimates.
- Standard error of the mean = population SD ÷ √(sample size).
- √36 = 6.
- ₹12,000 ÷ 6 = ₹2,000.
- Shortcut: to halve the standard error you need four times the sample (√4 = 2). So 144 accounts would give ₹1,000.
Why the others are wrong:
- A (₹333): ₹333 is ₹12,000 ÷ 36 — dividing by the sample size instead of its square root.
- B (₹12,000): ₹12,000 is the SD of a single account’s balance. It ignores the steadying effect of averaging 36 accounts.
- C (₹72,000): ₹72,000 is ₹12,000 × 6 — multiplying by √n instead of dividing.
- D (₹3,920): ₹3,920 is 1.96 × ₹2,000, the 95% margin of error around the sample mean, not the standard error itself.
Check: SE = 12,000 ÷ √36 = 12,000 ÷ 6 = ₹2,000. A 95% interval would be the sample mean ± 1.96 × 2,000 = ± ₹3,920 (option D).
Memory tip: Standard error = SD ÷ √n. Square root of n, never n itself.
Show answer
Answer: A — At a corner (vertex) point of the feasible region.
The idea: In the diagram, the loan amounts are the two axes and the three limits (total funds, sector exposure, staff hours) form the blue region. The green line is interest income. Slide it up and right and it keeps earning more until it is about to leave the region, and the last point it touches is corner A.
- Each limit is a straight line. Together with the two axes they enclose the blue feasible region — the mixes of Loan 1 and Loan 2 that are allowed.
- Interest income is also a straight line. Every dashed line in the diagram is the same income; the solid green line is a higher income.
- You can keep sliding that line up and right, earning more, until it is just about to leave the region. The last point it touches is a corner. That corner is the optimum.
- In practice, list the corner points, work out the income at each, and pick the best. If two adjacent corners tie, every point on the edge between them is also optimal.
Why the others are wrong:
- B (At the centre (centroid) of the feasible region): You can always move from the centre toward the boundary and earn more.
- C (Always at the origin, where both loan amounts are zero): Zero lending means zero interest. It is a corner, but a very poor one. "Always" makes this option wrong.
- D (Only at a point strictly inside the feasible region): Any interior point can be improved by moving to the edge.
- E (Wherever the two loan amounts are equal): This is just a line through the region, with no link to where income peaks.
Check: On the diagram, any income line through B, C, D or E can still be slid farther up and right. The solid green line cannot: it already rests on corner A.
Memory tip: Slide the income line until it last touches the region. That point is a corner — so in linear programming you only need to test the vertices.
Answer: A — At a corner (vertex) point of the feasible region.
The idea: In the diagram, the loan amounts are the two axes and the three limits (total funds, sector exposure, staff hours) form the blue region. The green line is interest income. Slide it up and right and it keeps earning more until it is about to leave the region, and the last point it touches is corner A.
- Each limit is a straight line. Together with the two axes they enclose the blue feasible region — the mixes of Loan 1 and Loan 2 that are allowed.
- Interest income is also a straight line. Every dashed line in the diagram is the same income; the solid green line is a higher income.
- You can keep sliding that line up and right, earning more, until it is just about to leave the region. The last point it touches is a corner. That corner is the optimum.
- In practice, list the corner points, work out the income at each, and pick the best. If two adjacent corners tie, every point on the edge between them is also optimal.
Why the others are wrong:
- B (At the centre (centroid) of the feasible region): You can always move from the centre toward the boundary and earn more.
- C (Always at the origin, where both loan amounts are zero): Zero lending means zero interest. It is a corner, but a very poor one. "Always" makes this option wrong.
- D (Only at a point strictly inside the feasible region): Any interior point can be improved by moving to the edge.
- E (Wherever the two loan amounts are equal): This is just a line through the region, with no link to where income peaks.
Check: On the diagram, any income line through B, C, D or E can still be slid farther up and right. The solid green line cannot: it already rests on corner A.
Memory tip: Slide the income line until it last touches the region. That point is a corner — so in linear programming you only need to test the vertices.
Show answer
Answer: D — Motivation will be low, because a weak belief that performance leads to reward pulls the overall force down.
The idea: Vroom says effort follows three linked beliefs: effort → performance (expectancy), performance → reward (instrumentality), and how much the reward is wanted (valence). They combine by multiplying, so if staff think the bonus will not be paid, motivation collapses even though the target looks achievable and the cash is attractive.
- Expectancy: “If I try harder, will I hit the target?” — here, yes (high).
- Instrumentality: “If I hit the target, will I actually get the reward?” — here, doubtful (low).
- Valence: “Do I want that reward?” — here, yes (high).
- Motivational force = Expectancy × Instrumentality × Valence. A value near zero in any one factor drags the product towards zero.
- Management fix: rebuild trust by paying earlier incentives on time and publishing clear payout rules.
Why the others are wrong:
- A (Motivation stays high because two of the three factors are strong): This treats the factors as if they were added. In Vroom’s model they are multiplied, so one weak link weakens the whole chain.
- B (Motivation stays high because the value of the reward alone drives effort): Valence alone is not enough; a highly valued reward that staff do not expect to receive does not drive effort.
- C (Motivation depends only on hygiene factors such as pay and working conditions): Hygiene factors belong to Herzberg’s two-factor theory, not Vroom’s expectancy theory.
- E (Motivation is unaffected, because this belief matters only for non-monetary rewards): Instrumentality applies to any reward, cash or non-cash; it is the belief that performance will be rewarded at all.
Check:
| Factor | Question staff ask | Here |
|---|---|---|
| Expectancy | Effort → target? | High |
| Instrumentality | Target → reward? | Low |
| Valence | Do I want it? | High |
High × Low × High = Low motivation.
Memory tip: Vroom: M = E × I × V — one weak link breaks the chain.
Answer: D — Motivation will be low, because a weak belief that performance leads to reward pulls the overall force down.
The idea: Vroom says effort follows three linked beliefs: effort → performance (expectancy), performance → reward (instrumentality), and how much the reward is wanted (valence). They combine by multiplying, so if staff think the bonus will not be paid, motivation collapses even though the target looks achievable and the cash is attractive.
- Expectancy: “If I try harder, will I hit the target?” — here, yes (high).
- Instrumentality: “If I hit the target, will I actually get the reward?” — here, doubtful (low).
- Valence: “Do I want that reward?” — here, yes (high).
- Motivational force = Expectancy × Instrumentality × Valence. A value near zero in any one factor drags the product towards zero.
- Management fix: rebuild trust by paying earlier incentives on time and publishing clear payout rules.
Why the others are wrong:
- A (Motivation stays high because two of the three factors are strong): This treats the factors as if they were added. In Vroom’s model they are multiplied, so one weak link weakens the whole chain.
- B (Motivation stays high because the value of the reward alone drives effort): Valence alone is not enough; a highly valued reward that staff do not expect to receive does not drive effort.
- C (Motivation depends only on hygiene factors such as pay and working conditions): Hygiene factors belong to Herzberg’s two-factor theory, not Vroom’s expectancy theory.
- E (Motivation is unaffected, because this belief matters only for non-monetary rewards): Instrumentality applies to any reward, cash or non-cash; it is the belief that performance will be rewarded at all.
Check:
| Factor | Question staff ask | Here |
|---|---|---|
| Expectancy | Effort → target? | High |
| Instrumentality | Target → reward? | Low |
| Valence | Do I want it? | High |
High × Low × High = Low motivation.
Memory tip: Vroom: M = E × I × V — one weak link breaks the chain.
Show answer
Answer: B — Results.
The idea: The bank is not asking whether officers liked the course or passed a test; it is asking whether the business numbers — slippage and recoveries — improved. That is the top level of Kirkpatrick’s model, Results.
- Level 1 Reaction: did participants find the programme useful and engaging? (feedback forms)
- Level 2 Learning: did knowledge or skill improve? (pre- and post-tests)
- Level 3 Behaviour: do participants apply it on the job? (supervisor observation, follow-up calls made)
- Level 4 Results: did organisational outcomes change? (slippage, recoveries, cost, customer complaints)
- Comparing trained and untrained branches on slippage and recoveries is a Level 4 measure.
Why the others are wrong:
- A (Reaction): Reaction captures participants’ satisfaction right after the session, not business outcomes months later.
- C (Learning): Learning checks gains in knowledge or skill, usually by tests at the end of training.
- D (Behaviour): Behaviour checks whether officers changed how they work (for example, making follow-up calls), not the resulting slippage and recovery numbers.
- E (Training needs analysis): Training needs analysis is done before training to decide what to teach; it is not a level of evaluation.
Check: Order to remember: Reaction → Learning → Behaviour → Results (feel → know → do → deliver).
Memory tip: Kirkpatrick RLBR: Reaction, Learning, Behaviour, Results — business numbers mean Level 4.
Answer: B — Results.
The idea: The bank is not asking whether officers liked the course or passed a test; it is asking whether the business numbers — slippage and recoveries — improved. That is the top level of Kirkpatrick’s model, Results.
- Level 1 Reaction: did participants find the programme useful and engaging? (feedback forms)
- Level 2 Learning: did knowledge or skill improve? (pre- and post-tests)
- Level 3 Behaviour: do participants apply it on the job? (supervisor observation, follow-up calls made)
- Level 4 Results: did organisational outcomes change? (slippage, recoveries, cost, customer complaints)
- Comparing trained and untrained branches on slippage and recoveries is a Level 4 measure.
Why the others are wrong:
- A (Reaction): Reaction captures participants’ satisfaction right after the session, not business outcomes months later.
- C (Learning): Learning checks gains in knowledge or skill, usually by tests at the end of training.
- D (Behaviour): Behaviour checks whether officers changed how they work (for example, making follow-up calls), not the resulting slippage and recovery numbers.
- E (Training needs analysis): Training needs analysis is done before training to decide what to teach; it is not a level of evaluation.
Check: Order to remember: Reaction → Learning → Behaviour → Results (feel → know → do → deliver).
Memory tip: Kirkpatrick RLBR: Reaction, Learning, Behaviour, Results — business numbers mean Level 4.
Show answer
Answer: A — ₹250 lakh.
The idea: The bank will fund at most ₹250 lakh of this borrower’s working capital. Of the ₹400 lakh gap left after trade credit, the promoter must bring ₹150 lakh (25% of all current assets) from long-term funds.
- Working capital gap = current assets − other current liabilities = 600 − 200 = ₹400 lakh.
- Second method: borrower’s margin = 25% of total current assets = 0.25 × 600 = ₹150 lakh.
- MPBF = 75% of current assets − other current liabilities = 450 − 200 = ₹250 lakh.
- Same answer the other way: gap − margin = 400 − 150 = ₹250 lakh.
- Shortcut: First method takes 25% of the gap as margin; second method takes 25% of the current assets, so it always gives the lower (stricter) MPBF.
Why the others are wrong:
- B (₹300 lakh): ₹300 lakh is 75% of the gap = 0.75 × 400. That is MPBF under the first method, where the margin is 25% of the gap.
- C (₹400 lakh): ₹400 lakh is the full working capital gap, with no borrower margin at all.
- D (₹450 lakh): ₹450 lakh is 75% of current assets before subtracting the other current liabilities.
- E (₹150 lakh): ₹150 lakh is the borrower’s required margin (25% of current assets), not the bank’s finance.
Check:
| Item | ₹ lakh |
|---|---|
| Current assets | 600 |
| Less: other current liabilities | 200 |
| Working capital gap | 400 |
| Less: margin 25% of CA | 150 |
| MPBF (2nd method) | 250 |
First method for comparison: 75% × 400 = 300.
Memory tip: Tandon II: 75% of CA minus OCL. Margin on the assets, not on the gap.
Answer: A — ₹250 lakh.
The idea: The bank will fund at most ₹250 lakh of this borrower’s working capital. Of the ₹400 lakh gap left after trade credit, the promoter must bring ₹150 lakh (25% of all current assets) from long-term funds.
- Working capital gap = current assets − other current liabilities = 600 − 200 = ₹400 lakh.
- Second method: borrower’s margin = 25% of total current assets = 0.25 × 600 = ₹150 lakh.
- MPBF = 75% of current assets − other current liabilities = 450 − 200 = ₹250 lakh.
- Same answer the other way: gap − margin = 400 − 150 = ₹250 lakh.
- Shortcut: First method takes 25% of the gap as margin; second method takes 25% of the current assets, so it always gives the lower (stricter) MPBF.
Why the others are wrong:
- B (₹300 lakh): ₹300 lakh is 75% of the gap = 0.75 × 400. That is MPBF under the first method, where the margin is 25% of the gap.
- C (₹400 lakh): ₹400 lakh is the full working capital gap, with no borrower margin at all.
- D (₹450 lakh): ₹450 lakh is 75% of current assets before subtracting the other current liabilities.
- E (₹150 lakh): ₹150 lakh is the borrower’s required margin (25% of current assets), not the bank’s finance.
Check:
| Item | ₹ lakh |
|---|---|
| Current assets | 600 |
| Less: other current liabilities | 200 |
| Working capital gap | 400 |
| Less: margin 25% of CA | 150 |
| MPBF (2nd method) | 250 |
First method for comparison: 75% × 400 = 300.
Memory tip: Tandon II: 75% of CA minus OCL. Margin on the assets, not on the gap.
Show answer
Answer: E — 30 June 2026, after it has stayed in the substandard category for 12 months.
The idea: Under IRAC norms an NPA sits in the substandard bucket for its first year. If it is still unresolved after 12 months as substandard, it moves to doubtful — so this loan becomes doubtful on 30 June 2026 and starts in the D1 sub-category.
- Day the account becomes NPA (more than 90 days overdue for a term loan): it is classified substandard.
- Substandard = an asset that has remained an NPA for up to 12 months.
- Doubtful = an asset that has remained in the substandard category for 12 months.
- 30 June 2025 + 12 months = 30 June 2026 → doubtful (D1: up to 1 year in doubtful; D2: 1–3 years; D3: more than 3 years).
- Note: a sharp fall in the security’s realisable value can push an account to doubtful or loss earlier; the stem rules that out.
Why the others are wrong:
- A (30 September 2025, 90 days after it became an NPA): 90 days overdue is the test for becoming an NPA (substandard) in the first place, not for moving to doubtful.
- B (31 December 2026, after 18 months in the substandard category): 18 months is longer than the current 12-month norm for leaving the substandard category.
- C (30 June 2028, after 36 months in the substandard category): 36 months is the boundary inside the doubtful category (D2 → D3, after 3 years as doubtful), not the entry point to doubtful.
- D (Only when the bank writes the loan off in its books): Write-off is not the trigger. An asset identified as uncollectible but not yet written off is a loss asset; doubtful classification comes by age well before that.
Check:
| Age as NPA | Category |
|---|---|
| Up to 12 months | Substandard |
| 12–24 months (D1) | Doubtful, up to 1 year |
| 24–48 months (D2) | Doubtful, 1–3 years |
| Over 48 months (D3) | Doubtful, more than 3 years |
Ages assume no earlier downgrade due to security erosion or fraud.
Memory tip: NPA at 90 days; doubtful 12 months later; D1–D2–D3 count years spent in doubtful (1 / 3).
Answer: E — 30 June 2026, after it has stayed in the substandard category for 12 months.
The idea: Under IRAC norms an NPA sits in the substandard bucket for its first year. If it is still unresolved after 12 months as substandard, it moves to doubtful — so this loan becomes doubtful on 30 June 2026 and starts in the D1 sub-category.
- Day the account becomes NPA (more than 90 days overdue for a term loan): it is classified substandard.
- Substandard = an asset that has remained an NPA for up to 12 months.
- Doubtful = an asset that has remained in the substandard category for 12 months.
- 30 June 2025 + 12 months = 30 June 2026 → doubtful (D1: up to 1 year in doubtful; D2: 1–3 years; D3: more than 3 years).
- Note: a sharp fall in the security’s realisable value can push an account to doubtful or loss earlier; the stem rules that out.
Why the others are wrong:
- A (30 September 2025, 90 days after it became an NPA): 90 days overdue is the test for becoming an NPA (substandard) in the first place, not for moving to doubtful.
- B (31 December 2026, after 18 months in the substandard category): 18 months is longer than the current 12-month norm for leaving the substandard category.
- C (30 June 2028, after 36 months in the substandard category): 36 months is the boundary inside the doubtful category (D2 → D3, after 3 years as doubtful), not the entry point to doubtful.
- D (Only when the bank writes the loan off in its books): Write-off is not the trigger. An asset identified as uncollectible but not yet written off is a loss asset; doubtful classification comes by age well before that.
Check:
| Age as NPA | Category |
|---|---|
| Up to 12 months | Substandard |
| 12–24 months (D1) | Doubtful, up to 1 year |
| 24–48 months (D2) | Doubtful, 1–3 years |
| Over 48 months (D3) | Doubtful, more than 3 years |
Ages assume no earlier downgrade due to security erosion or fraud.
Memory tip: NPA at 90 days; doubtful 12 months later; D1–D2–D3 count years spent in doubtful (1 / 3).
Show answer
Answer: C — Insolvency resolution process costs and liquidation costs, in full.
The idea: Before any creditor gets a rupee, the costs of running the insolvency and liquidation process itself are paid in full. Without that, nobody would act as resolution professional or liquidator.
- Section 53 of the IBC sets the distribution order (the “waterfall”) in liquidation.
- 1st: insolvency resolution process costs and liquidation costs, paid in full.
- 2nd (ranking equally): workmen’s dues for 24 months before liquidation, and debts of secured creditors who relinquished their security to the liquidation estate.
- 3rd: wages and unpaid dues of employees other than workmen for 12 months.
- 4th: financial debts to unsecured creditors; 5th: government dues (up to 2 years) and secured creditors’ unpaid shortfall; then remaining debts, preference shareholders and finally equity shareholders.
Why the others are wrong:
- A (Workmen’s dues for the 24 months before the liquidation): Workmen’s dues (24 months) rank second, equally with secured creditors who relinquished security — after process costs.
- B (Financial debts owed to unsecured creditors): Unsecured financial creditors come fourth, after process costs, workmen/relinquishing secured creditors and other employees.
- D (Dues owed to the Central and State Governments): Government dues rank below unsecured financial creditors, alongside the unpaid shortfall of secured creditors who enforced their security outside the estate.
- E (Equity shareholders’ residual claim): Equity shareholders are last in the waterfall and are paid only if anything remains.
Check: Order to remember: Costs → Workmen + relinquishing secured → Other employees → Unsecured financial → Govt + secured shortfall → Others → Preference → Equity.
Memory tip: In liquidation, the process gets paid before the creditors; equity is always last.
Answer: C — Insolvency resolution process costs and liquidation costs, in full.
The idea: Before any creditor gets a rupee, the costs of running the insolvency and liquidation process itself are paid in full. Without that, nobody would act as resolution professional or liquidator.
- Section 53 of the IBC sets the distribution order (the “waterfall”) in liquidation.
- 1st: insolvency resolution process costs and liquidation costs, paid in full.
- 2nd (ranking equally): workmen’s dues for 24 months before liquidation, and debts of secured creditors who relinquished their security to the liquidation estate.
- 3rd: wages and unpaid dues of employees other than workmen for 12 months.
- 4th: financial debts to unsecured creditors; 5th: government dues (up to 2 years) and secured creditors’ unpaid shortfall; then remaining debts, preference shareholders and finally equity shareholders.
Why the others are wrong:
- A (Workmen’s dues for the 24 months before the liquidation): Workmen’s dues (24 months) rank second, equally with secured creditors who relinquished security — after process costs.
- B (Financial debts owed to unsecured creditors): Unsecured financial creditors come fourth, after process costs, workmen/relinquishing secured creditors and other employees.
- D (Dues owed to the Central and State Governments): Government dues rank below unsecured financial creditors, alongside the unpaid shortfall of secured creditors who enforced their security outside the estate.
- E (Equity shareholders’ residual claim): Equity shareholders are last in the waterfall and are paid only if anything remains.
Check: Order to remember: Costs → Workmen + relinquishing secured → Other employees → Unsecured financial → Govt + secured shortfall → Others → Preference → Equity.
Memory tip: In liquidation, the process gets paid before the creditors; equity is always last.
Show answer
Answer: B — Second line, along with risk management, as an independent oversight function.
The idea: Business units own and manage their risks day to day (first line). Compliance and risk management set standards, advise and monitor, independently of the business (second line). Internal audit then checks independently that both lines are working (third line).
- First line: business and operations — branches, credit and treasury desks that take the risk and run first-level controls.
- Second line: risk management and compliance — frameworks, policies, monitoring, reporting to senior management and the Board.
- Third line: internal audit — independent assurance to the Board/Audit Committee on the effectiveness of the first two lines.
- Independence: compliance should not report to the business it oversees; it reports through the Chief Compliance Officer to top management and the Board.
Why the others are wrong:
- A (First line, together with the business units that originate loans and deposits): The first line is the business units themselves; putting compliance there would remove its independence from the people taking the risk.
- C (Third line, providing independent assurance over the whole organisation): The third line is internal audit, which also audits the compliance function.
- D (Outside the model, as a support desk reporting to branch heads): Compliance is a core control function inside the model, and reporting to branch heads would compromise its independence.
- E (It replaces internal audit as the bank’s independent assurance line): Compliance and internal audit are separate; internal audit independently reviews compliance, so one cannot replace the other.
Check:
| Line | Who | Role |
|---|---|---|
| 1st | Business / operations | Own and manage risk |
| 2nd | Risk management, Compliance | Set standards, monitor |
| 3rd | Internal audit | Independent assurance |
Memory tip: Do → Watch → Check: business does, compliance and risk watch, audit checks.
Answer: B — Second line, along with risk management, as an independent oversight function.
The idea: Business units own and manage their risks day to day (first line). Compliance and risk management set standards, advise and monitor, independently of the business (second line). Internal audit then checks independently that both lines are working (third line).
- First line: business and operations — branches, credit and treasury desks that take the risk and run first-level controls.
- Second line: risk management and compliance — frameworks, policies, monitoring, reporting to senior management and the Board.
- Third line: internal audit — independent assurance to the Board/Audit Committee on the effectiveness of the first two lines.
- Independence: compliance should not report to the business it oversees; it reports through the Chief Compliance Officer to top management and the Board.
Why the others are wrong:
- A (First line, together with the business units that originate loans and deposits): The first line is the business units themselves; putting compliance there would remove its independence from the people taking the risk.
- C (Third line, providing independent assurance over the whole organisation): The third line is internal audit, which also audits the compliance function.
- D (Outside the model, as a support desk reporting to branch heads): Compliance is a core control function inside the model, and reporting to branch heads would compromise its independence.
- E (It replaces internal audit as the bank’s independent assurance line): Compliance and internal audit are separate; internal audit independently reviews compliance, so one cannot replace the other.
Check:
| Line | Who | Role |
|---|---|---|
| 1st | Business / operations | Own and manage risk |
| 2nd | Risk management, Compliance | Set standards, monitor |
| 3rd | Internal audit | Independent assurance |
Memory tip: Do → Watch → Check: business does, compliance and risk watch, audit checks.
Show answer
Answer: D — Audit Committee of the Board.
The idea: The Audit Committee of the Board (ACB) is the Board’s eye on audit. It directs and reviews internal audit and inspection, follows up statutory and RBI inspection observations and reviews the financial statements before the full Board approves them.
- RBI has required banks to set up an Audit Committee of the Board for many years; it is chaired by an independent / non-executive director with audit or finance knowledge.
- Its core work: overseeing internal audit and inspection, reviewing audit reports and compliance with them, interacting with statutory auditors and reviewing financial reporting.
- Internal audit (the third line of defence) reports functionally to the ACB, which protects its independence from the management it audits.
Why the others are wrong:
- A (Nomination and Remuneration Committee): The Nomination and Remuneration Committee deals with Board appointments, fit-and-proper checks and pay policy, not audit oversight.
- B (Risk Management Committee of the Board): The Risk Management Committee oversees the bank’s risk policies and limits (credit, market, operational), not the audit function.
- C (Stakeholders Relationship Committee): The Stakeholders Relationship Committee handles shareholder and security-holder grievances.
- E (Customer Service Committee of the Board): The Customer Service Committee looks at service quality and customer complaints, not audit findings.
Check: Audit issues → ACB; risk limits → RMCB; appointments and pay → NRC; shareholders → SRC; customers → CSC.
Memory tip: Audit findings go to the Audit Committee — the Board’s link to internal and statutory auditors.
Answer: D — Audit Committee of the Board.
The idea: The Audit Committee of the Board (ACB) is the Board’s eye on audit. It directs and reviews internal audit and inspection, follows up statutory and RBI inspection observations and reviews the financial statements before the full Board approves them.
- RBI has required banks to set up an Audit Committee of the Board for many years; it is chaired by an independent / non-executive director with audit or finance knowledge.
- Its core work: overseeing internal audit and inspection, reviewing audit reports and compliance with them, interacting with statutory auditors and reviewing financial reporting.
- Internal audit (the third line of defence) reports functionally to the ACB, which protects its independence from the management it audits.
Why the others are wrong:
- A (Nomination and Remuneration Committee): The Nomination and Remuneration Committee deals with Board appointments, fit-and-proper checks and pay policy, not audit oversight.
- B (Risk Management Committee of the Board): The Risk Management Committee oversees the bank’s risk policies and limits (credit, market, operational), not the audit function.
- C (Stakeholders Relationship Committee): The Stakeholders Relationship Committee handles shareholder and security-holder grievances.
- E (Customer Service Committee of the Board): The Customer Service Committee looks at service quality and customer complaints, not audit findings.
Check: Audit issues → ACB; risk limits → RMCB; appointments and pay → NRC; shareholders → SRC; customers → CSC.
Memory tip: Audit findings go to the Audit Committee — the Board’s link to internal and statutory auditors.
Topics covered today
- Module A — Statistics: Correlation and Regression; Estimation and Standard Error; Linear Programming
- Module B — Human Resource Management: Motivation Theories; Training and Development
- Module C — Credit Management: Working Capital Finance; NPA and Stressed Assets; Resolution of Stressed Assets under IBC 2016
- Module D — Compliance in Banks & Corporate Governance: Compliance Function in Banks; Corporate Governance in Banks
Tomorrow’s post continues the series with another fresh set of 10 CAIIB Advanced Bank Management practice questions. Bookmark SimplifyingFin and revise one set a day.
Disclaimer: This quiz is an independent practice aid for educational purposes. It is not affiliated with, endorsed by, or published by IIBF. Always cross-check regulations and circulars from official RBI/IIBF sources before relying on any figure in an exam or at work.

